780425
4
Zoom out
Zoom in
Previous page
1/12
Next page
EN FR ES
Connect lap and shoulder belts with locking clip as shown. See Figure 10.1.
Re-buckle belt. Check that the lap belt dos not move by pulling and pushing hard on the doll carrier and base. If belt loosens or lengthens,
repeat procedure.
11 Unacceptable Vehicle Belt Systems
DO NOT use any of the following systems to secure the car seat.
Lap Belts with Emergency Locking Retractor (ELR): This lap belt stays loose and can move until it locks in a sudden stop or crash.
Combination Lap/Shoulder Belt with Retractor: Each strap has a retractor at one end and is attached to the latch plate at the other end.
Passive Restraint-Lap or Shoulder Belt Mounted on Door.
Passive Restraint-Lap Belt with motorized Shoulder Belt
Lap Belts Installed Forward of Seat Crease
12 Installing Doll Car Seat with LATCH
Remove doll carrier from base.
Extend LATCH Attachment Strap to its maximum length.
Place the base in a rear-facing position in the vehicle seat.
Thread LATCH Attachment Strap inside and through the curved plastic piece under the base. See Figure 12.1.Makesurestraplaysat
and is not twisted.
Push the connectors through the seat crease slots and hook them to vehicle lower anchors. See Figure 12.2.Pullrmlyonconnectorsto
be sure they are attached.
Tighten LATCH by pushing down hard on the base and pulling the adjustment belt.
• NEVERputtwoLATCHAttachmentStrapconnectorsononevehicleLATCHanchorunlessspecicallyallowedbythevehicle
manufacturer.
Place the doll carrier in the base and make sure that it “clicks”. Pull up on the doll carrier to be sure it is latched securely in the base.
Check that the LATCH Attachment Strap stays tight and does not slip from the tightened position. If it does, try another seating position or
contact our Customer Service Department at (877) 456-5049 for assistance.
!WARNING
ONLY use to attach TOY doll products to vehicle LATCH anchors.
DO NOT use for actual child car seat or other restraint system.
Discard this product if it is ever involved in an actual vehicle accident.
DO NOT allow children to play with this product.
Maintenance
The locking mechanism and all plastic parts on the car seat should be inspected periodically to insure that they are secured properly and not
damaged or malfunctioning. The safety harness, fabric items and their stitching should also be inspected periodically to insure that they are
secured properly and not loose, torn or otherwise damaged.
Fabric fading may occur if the car seat is left in direct sunlight or for long periods of time. When not in use, store the car seat out of direct
sun.
Cleaning Your Doll Car Seat
Seat Pad: The fabric material on this carrier can be cleaned using mild household soap or detergent and warm water on a sponge or clean
cloth. Always allow the fabric to completely air dry before using the carrier.
If the carrier seat pad becomes heavily soiled it can be removed for more extensive cleaning. To remove the pad, unbuckle the straps from
the safety harness buckle. Pull the shoulder straps and waist/crotch straps through the slots in the pad and remove the pad. Machine wash
on a delicate cycle and line dry. DO NOT USE BLEACH. Reverse steps to reinstall the seat pad.
Harness Straps: Harness straps can be spot cleaned with a mild soap and water solution. DO NOT MACHINE WASH OR IMMERSE
HARNESS STRAPS IN WATER. Doing so may weaken the straps.
Plastic Parts: Parts can be cleaned by wiping with a mild soap and water solution. DO NOT USE BLEACH. Bleach may weaken plastic
parts.
SATISFACTION GUARANTEED
We want you to be completely satised with your purchase of this product. Should you experience any difculty in
assembling or using this product, or if you have any questions, please contact our Customer Service Department:
UNITED STATES – Joovy: (877) 456-5049, Hours 8:30 am – 5:00 pm Central Time.
CANADA – Elfe Juvenile Products: (800) 667-8184, Hours 8:30 am – 5:00 pm Eastern Time.
Please log onto www.joovy.com to register your new Joovy product.
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Joovy 003 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Joovy 003 in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 0.29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info