Manual JML ElectroVita Circulation Enhancer (page 14 of 24) (English)

627320

14

Zoom out

Zoom in

Previous page

1/24

Next page

How to operate

For Body – BAND 2

Using the Gel Pads

Connect the output wire to the gel pads. Connect the other end of the output wire to the

output jack on ElectroFlex. Remove the protective ﬁlm from the adhesive pads. Attach the

gel pads to the skin. Press the on/off button for 3 seconds to turn on the unit andadjust the

stimulating mode and output intensity to the desired level. (The display will show the mode

and level that you selected and start to count down).

1. Plug the 2 cables into the cable jack at the side of the unit. (See Figure 6).

2. Connect pin of the cable to the gel pad. (See Figure 7).

3. Remove the protective ﬁlm from the gel pad, and attached the 4 pads to the area of the

body you wish to treat.

4. Repeat operation as in foot instructions, adjust the intensity using Band 2.

5. Gently increase the intensity setting by pushing the button “

”. Or decrease intensity

setting by pushing the button “

”. (See Figure 8). The LCD will show the level selected

(see Figure 9). When you reach the desired Level the icon will blink. To stop the blinking and

maintain the intensity press the “

” button 5 times.

6. To terminate the massage period, turn off the unit a tanytime by pressing the on/off Button

for 3 seconds. The unit has an auto timer, it will start to count down from 25 minutes of

massage and switch off automatically.

If you want to use with 2 gel pads only, then you must connect 1 gel pad to Jack A

and 1 gel pad to Jack B.

Care of your Gel Pads

Never stick two adhesive pads to each other. Keep the adhesive gel pads clean, do

not expose them to high temperature or direct sunshine. If the electrode gel pads are

insufﬁciently adhesive or dirty, wipe with a damp or change for new ones. Replacement parts

will be available directly from BioEnergiser or your distributor. Do not clean the electrode gel

pads with any chemical. ALWAYS try and protect the gel pads store on the gel

pad protector when not in use, as illustrated.

BAND1

BAND2

Min

Fig 6 Fig 7 Fig 8 Fig 9

13

Shoulder/Back Thighs Tummy Lower back Arms

1

All lights are on but nothing is happening what am I doing wrong Submitted on 13-7-2023 at 18:12
Reply Report abuse
How often should you use the foot circulation programme please Submitted on 16-5-2021 at 17:31
Reply Report abuse
My machine turns on but I cant adjust the programmes Submitted on 15-4-2021 at 20:07
Reply Report abuse
ik wil graag een nederlandse handleiding voor de circulation enhancer Submitted on 6-4-2021 at 16:06
Reply Report abuse
Hello all
I have had to use my circulation enhancer because I have a pain in the left calf muscle, I set up two pads on my muscle and put the scale to 40 with no response, I set up my feet to see if it's working and only the right side was working is it me ? Or is there a fault ?
I would like your feedback
William Kelly 07710427574 Submitted on 16-2-2021 at 18:57
Reply Report abuse
Hello all
I have had to use my circulation enhancer because I have a pain in my calf muscle, left side,
I put two pads on my muscle put the scale to max 40 nothing, So I tried my feet on the machine and only the right
Side was working could you please help me
Regards
William Kelly 07710427574 Submitted on 16-2-2021 at 18:54
Reply Report abuse
We have received this massager as a gift minus instructions . When plugged in the screen lights up then goes out and we can’t proceed any further , can you help ? Submitted on 31-5-2020 at 08:28
Reply Report abuse
- I printed the instruction off the internet Answered on 16-5-2021 at 17:33
  Vote up (1) Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

Register

Register getting emails for JML ElectroVita Circulation Enhancer at:

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of JML ElectroVita Circulation Enhancer in the language / languages: English as an attachment in your email.

The manual is 0,81 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info