Manual JML ElectroVita Circulation Enhancer (page 13 of 24) (English)

627320

13

Zoom out

Zoom in

Previous page

1/24

Next page

How to operate

For feet - BAND 1

In order to increase the conductivity we recommend that you dampen the soles

of your feet.

1. Place your bare feet onto ElectroVita (do not wear socks).

2. Press (and hold down for 3 seconds) the on/off button, the LCD screen will light up in blue.

The program will show 01 and both band shows 00, which means the device is in standby

mode. (See Figure 3).

3. Select the program you wish to use, there are 10 different programs which are indicated

on the LCD display. Select the program by pressing “P+” and “P-”. (See Figure 4).

Gently increase intensity setting by holding down the button “

”. Or decrease intensity

setting by holding down the button “

”. The intensity level is adjustable between 0 and 40.

(See Figure 7). In order to let the user feel the stimulation gradually increase the intensity to

a comfortable level by holding down the “

” intensity button. Those who suffer with poor

circulation may not feel anything until reaching a higher level of intensity. There are 40

output levels. When you reach your desired intensity level release the button, the icon will

blink. To stop the blinking and maintain the intensity press the “

” button 5 times.

4. You can adjust the program anytime. Once re-adjusted the intensity will return to “0”. So

you will have to increase the intensity to the desired level. The LCD will also show the level

which you have selected. (See Figure 5). To terminate the massage period, you can turn off

the unit anytime by pressing the on/off button for 3 seconds. The unit has an auto timer, it will

start to count down from 25 minutes of massage and switch off automatically.

BAND1

BAND2

PROGRAM

Min

Fig 1 Fig 2 Fig 3

12

1

All lights are on but nothing is happening what am I doing wrong Submitted on 13-7-2023 at 18:12
Reply Report abuse
How often should you use the foot circulation programme please Submitted on 16-5-2021 at 17:31
Reply Report abuse
My machine turns on but I cant adjust the programmes Submitted on 15-4-2021 at 20:07
Reply Report abuse
ik wil graag een nederlandse handleiding voor de circulation enhancer Submitted on 6-4-2021 at 16:06
Reply Report abuse
Hello all
I have had to use my circulation enhancer because I have a pain in the left calf muscle, I set up two pads on my muscle and put the scale to 40 with no response, I set up my feet to see if it's working and only the right side was working is it me ? Or is there a fault ?
I would like your feedback
William Kelly 07710427574 Submitted on 16-2-2021 at 18:57
Reply Report abuse
Hello all
I have had to use my circulation enhancer because I have a pain in my calf muscle, left side,
I put two pads on my muscle put the scale to max 40 nothing, So I tried my feet on the machine and only the right
Side was working could you please help me
Regards
William Kelly 07710427574 Submitted on 16-2-2021 at 18:54
Reply Report abuse
We have received this massager as a gift minus instructions . When plugged in the screen lights up then goes out and we can’t proceed any further , can you help ? Submitted on 31-5-2020 at 08:28
Reply Report abuse
- I printed the instruction off the internet Answered on 16-5-2021 at 17:33
  Vote up (1) Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

Register

Register getting emails for JML ElectroVita Circulation Enhancer at:

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of JML ElectroVita Circulation Enhancer in the language / languages: English as an attachment in your email.

The manual is 0,81 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info