623895
30
Zoom out
Zoom in
Previous page
1/39
Next page
ENGLISH
30
CLOCK FUNCTIONS
Operating the radio
• Slide the FUNCTION switch (22) on the device to AM or FM. If the function switch is in the AM position, the
device is operating in the AM radio range. If the function switch is in the FM position, the device is operating
in the FM radio range.
• Select the desired radio station by means of the TUNING control (27).
• The LED indicator FMST. (C) will come on, if you are receiving a FM stereo station. Only FM stations are
broadcast in stereo.
Setting the time
• After you have connected the power plug (25) to a power outlet, the time 12:00 will blink in the display(7).
• Hold the CLOCK/ADJ. button (18) down for 2 seconds. Either 24 H or 12 H will be shown in the display. To
change the time configuration, hold the CLOCK/ADJ. button (18) down again for 2 seconds. If you choose
the 24-hour time format, the time of 0.00 will blink in the display panel. For the 12-hour time format, the
time 12:00 will blink in the display.
• Press the /MINUTE button (12) to set the minutes and the /HOUR button (11) to set the hours.
Confirm by pressing the CLOCK/ADJ. button.
• If you select the 12-hour display, the LED indicator PM (D) will also be displayed for times after noon.
• If you would like to reset the time again later, press briefly on the CLOCK/ADJ. button. The time will blink in
the display. Set the time by means of the /MINUTE and /HOUR buttons and confirm by pressing the
CLOCK/ADJ. button.
The time will not be saved, if you pull the plug (25) and if there are no batteries in the battery
compartment (24) on the back of the device. In that event, set the new time again.
Setting the alarm
• You can set a time to wake up at which the device will come on either in the radio or CD mode. Or you can
be awakened by an alarm signal. You can save two wake-up times in total.
• Press the ALARM1 (15) or the ALARM2 (14) button. The time digits will blink in the display.
• Set the wake up time with the /MINUTE (12) and /HOUR (11) buttons and confirm it by pressing
either the ALARM1 or ALARM2 button.
• The LED indicator AL.1 (J) or AL.2 (I) will light up. If you have saved 2 wake up times, both LED indicators
will come on.
• Set the desired volume by turning the volume control (23) on the device.
• Set the FUNCTION switch (22) to CD, if you would like to be awakened by music from a CD. Make sure that
there is a CD in the CD compartment (1).
• Set the FUNCTION switch to AM or FM, if you would like to be awakened by the radio. Select the desired
radio station by means of the TUNING control (27).
• Set the FUNCTION switch to BUZZER/AUX IN in order to be awakened by an alarm signal.
JGC-URCD-20-IM-DE-EN-V1.indb 30 29/01/2010 5:26 PM
30


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JGC URCD-20 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JGC URCD-20 in the language / languages: English, German as an attachment in your email.

The manual is 1,71 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info