623895
29
Zoom out
Zoom in
Previous page
1/39
Next page
ENGLISH
29
BASIC FUNCTIONS
Volume
• Set the desired volume by turning the volume control (23) on the device.
• To reduce the volume, turn the control in the direction of MIN..
• To increase the volume, turn the control in the direction of MAX..
• Warning: Extremely high volume can lead to permanent hearing damage due to excessive sound pressure.
Connecting an external device
• Using the AUX IN socket (20), an external music player (e.g. MP3 player) can be connected to this device
and music can be played over the loudspeakers.
• Attention: Before connecting your external playback device, please also read the operating instructions for
information regarding safety instructions and usage with other devices.
• Turn off the playback device and the external playback device.
• Connect the external playback device using a stereo cable (Ø3.5 mm). The cable is not included in the scope
of delivery.
• Connect the stereo cable with the AUX IN socket (20) and put the other end into the headphone jack or
the LINE-OUT jack of the playback device. If the external device has a smaller or larger socket, then use a
corresponding adaptor (not included in the scope of delivery).
• First turn on the external device and set the volume to zero. Then turn this device on and set the volume to
zero as well.
• Slide the FUNCTION switch (22) to the operating mode BUZZER/AUX IN.
• Now you can regulate the volume of both devices. If the playback device is connected via the LINE-OUT jack
on the external device, then regulate the volume on the playback device.
• However, playback is controlled using the external device.
• Please note that if you only turn off this device, the external playback device will continue playing.
Connecting headphones
• This device is equipped with a 3.5 mm headphone jack (21) to which you can connect most commercially
available headphones or earphones (not included).
• If headphones or earphones are connected to the headphone jack, the built-in speakers will be deactivated
automatically.
Display lighting
• You can set the brightness of the display panel by means of the DIMMER switch (19) on the back of the
device.
• The panel is brightly lit, when the switch is in the BRIGHT position. In the DIM position, the display panel will
fade.
Antennas
• For FM reception, this device is equipped with a FM wire antenna (26). Unwind the FM wire antenna and lay
it out.
• A ferrite antenna has been built into this device for the AM reception. Orientate the device in such a way that
you will receive the stations with the best possible sound quality.
JGC-URCD-20-IM-DE-EN-V1.indb 29 29/01/2010 5:26 PM
29


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JGC URCD-20 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JGC URCD-20 in the language / languages: English, German as an attachment in your email.

The manual is 1,71 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info