623890
27
Zoom out
Zoom in
Previous page
1/31
Next page
ENGLISH
27
CLOCK FUNCTIONS
Waking up with the alarm sound
• You can program the time at which you wish to be awakened with the alarm sound.
• The wake up time can only be set in standby mode (radio turned off but still connected to the power supply).
• Press the BAND/AL.SET button (16). The alarm symbol will be
shown blinking in the display (11) and the hour will also blink on 0 (fig. 6).
• Press the DOWN (3) or UP (2) button to set the hour and confirm the
selection with the BAND/AL.SET button. Set the minutes using the same
procedure.
• After the minutes have been set and saved, the time and the alarm
symbol will automatically be displayed.
Fig. 6
• To turn off the alarm, press the BAND/AL.SET button. The symbol disappears from the display.
• Press the ON/OFF button (6) to disable the alarm.
If you do not press any button for approx. 5 seconds, then the display changes back to whatever
was previously shown. You must then press the BAND/AL.SET button again.
If both alarm functions (“Waking up with the radio” and “Waking up with the alarm sound“) are
programmed for the same time, then only the alarm sound will go off.
Programming auto-off (sleep)
• To fall asleep while listening to music, you can set the duration from 90 minutes down to 10 minutes. After
the set time has elapsed, the radio turns off automatically.
• While the radio is on, continuously press the SLEEP/WAKE button (5) to
decrease the auto-off time in 10-minute intervals (fig. 7). This is how you
select the time remaining before the radio turns off.
• After a few seconds, the previously shown values are displayed as well as
a bed symbol:
• In order to disable the sleep function, press the SLEEP/WAKE button
once. The bed symbol disappears from the display.
Fig. 7
If you do not press any button for approx. 5 seconds, then the setting of the sleep function is
cancelled.
You can turn off the radio at any time before the set time has elapsed by pressing the ON/OFF
button (6).
JGC-UR-210-IM-DE-EN-V3.indb 27 03/12/2009 10:41 AM
27


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JGC UR-210 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JGC UR-210 in the language / languages: English, German as an attachment in your email.

The manual is 2,61 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info