623890
25
Zoom out
Zoom in
Previous page
1/31
Next page
ENGLISH
25
RADIO OPERATION
Direct input of a radio station frequency
• Example: You would like to directly enter the frequency FM 87.5 MHz.
• Press the ENTRY button (15) to begin with the frequency input.
• Press the numeric keys (17) 8, 7 and 5 one after another.
• Confirm your input with the ENTRY button.
If you do not press any button for approx. 8 seconds long, then the display (11) changes back to
whatever was previously shown. You must then press the ENTRY button again.
When “Err” is shown in the display (after you confirmed your entry with the ENTRY button), then the
actual frequency is not within the selected frequency range.
Enter a valid station frequency.
Saving the station
• This radio can save a total of 40 radio stations for easier access. There are 10 memory locations available
per frequency range.
• Using the BAND/AL.SET button (16), select a frequency range and set the desired station.
• Press the TIME SET/MEMORY button (8). In the display, the number
of the memory location will be shown and the indicator MEMO will blink
(fig. 4). The desired memory location number can be selected with the
numeric keys (17) and can be saved with the TIME SET/MEMORY
button.
• Save additional stations in the same way.
• You delete a radio station from a memory location when you save another
station in its place. The previously saved station will be automatically
overwritten.
FM
MHz
MEMO
CH
Fig. 4
If you do not press any button for approx. 5 seconds, then the display changes back to whatever was
previously shown. You must then press the TIME SET/MEMORY button again.
Recalling a station
• To recall the memory location of a saved station, use the numeric keys (17). The station will automatically be
set.
• To recall the memory location 10, press the numeric key 0.
• The number of the memory location will be shown in the display (11).
JGC-UR-210-IM-DE-EN-V3.indb 25 03/12/2009 10:41 AM
25


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JGC UR-210 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JGC UR-210 in the language / languages: English, German as an attachment in your email.

The manual is 2,61 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info