623877

JGC RRMP 3500 Manual

14
Zoom out
Zoom in
Previous page
1/18
Next page
Side A Side B
RECORD (DECK A ONLY)
Press REC (20) to simultaneously activate PLAY (21). If the inserted tape is write-protected both
buttons will not lock in place and no recording is possible.
RECORDING FROM DISC (DECK A ONLY)
1. Set the function selector (7) to CD/MP3 position.
2. Insert a CD.
3. Select the track to be recorded with (37) or (38).
4. Press (33).
5. Press STOP/EJ. (24) to open deck A.
6. Insert a blank cassette.
7. Ensure the write protection is not removed.
8. Close the cassette deck.
9. Press REC (20).
10. Press (33) to start CD playback.
11. To pause your recording press PAUSE (25).
12. To resume the recording press PAUSE (25) again.
13. Press STOP/EJ. (24) to stop the recording.
RECORDING FROM RADIO (DECK A ONLY)
1. Set the function selector (7) to RADIO position.
2. Select frequency band and radio station.
3. Insert a blank cassette.
4. Press REC (20).
5. To pause your recording press PAUSE (25).
6. To resume the recording press PAUSE (25) again.
7. Press STOP/EJ. (24) to stop the recording.
RECORDING FROM BUILT-IN MICROPHONE (DECK A ONLY)
1. Set the function selector (7) to TAPE (NOR) position.
2. Insert a blank cassette.
3. Press REC (20) and talk into the built-in microphone MIC (17).
4. Press STOP/EJ. (24) to stop the recording.
ERASE A TAPE
1. Set the function selector (7) to TAPE (NOR) position.
2. Press REC (20) to erase the existing recordings. Ensure only little background noise, as the built-in
microphone MIC (17) is turned on.
DUBBING FROM DECK B TO DECK A
The 2 decks of the unit allow dubbing from tape to tape. Recording is only possible with deck A; deck B
serves only playback purposes. You can dub with normal speed or high speed.
1. Insert the recorded tape in deck B.
2. Insert the tape to be recorded in deck A.
3. Set the function selector (7) to TAPE (HI) or TAPE (NOR) position. TAPE (HI) is used for
high-speed dubbing and TAPE (NOR) for dubbing with normal speed.
4. Press PAUSE (25) and (30) for decks A and B.
5. Press REC (20) for deck A.
6. Press PLAY (26) for deck B and PAUSE (25) for deck A (to start the recording).
PLAYBACK
1. Set the function selector (7) to TAPE (NOR) position.
2. Insert a tape as described above.
3. Press PLAY (21) to start playback of deck A or press PLAY (26) for deck B. Playback stops
automatically at the end of the tape.
4. Press STOP/EJ. (24) or (29) to stop playback prior to the end of the tape.
FAST FORWARD/REWIND
1. Press REW (22) to activate rewind for deck A or press REW (27) for deck B.
2. Press F.FWD (23) to activate fast forward for deck A or press F.FWD (23) for deck B.
3. Press STOP/EJ. (24) or (29) to stop fast forward/rewind.
CASSETTE OPERATIONOPERATING INSTRUCTIONS
ENGLISH
ENGLISH
HEARING PROTECTION
To protect your hearing when wearing headphones please follow these simple suggestions:
Reduce the volume before connecting your earphones. Adjust volume slowly when wearing the
earphones.
Do not set the earphones volume too loud. Longer listening at higher volumes may cause
permanent hearing damage.
After adjusting the volume do not increase it. Your hearing adapts to the higher volume, which may
cause hearing damage.
OPERATING INSTRUCTIONS
RADIO
1. Set the function selector (7) to RADIO position.
2. Set the BAND selector (14) to the desired frequency band.
3. Select your favorite radio station with the TUNING control (15); the frequency is displayed on the dial
scale (11).
4. Adjust the volume with the VOLUME control (16).
5. Set the function selector (7) to TAPE position to turn the radio off.
FM STEREO
While listening to FM stereo broadcast the FM STEREO indicator (5) will light up.
ANTENNA
FM : For best reception fully extend and rotate the telescopic antenna (42).
AM : The AM antenna is built-in; adjust the unit for best reception.
CASSETTE OPERATION
INSERT CASSETTE
1. Set the function selector (7) to TAPE (NOR)
position.
2. Press STOP/EJ. (24) to open the
cassette deck.
3. Insert a tape and close the deck manually.
8 9
… 14 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JGC RRMP 3500 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JGC RRMP 3500 in the language / languages: English, German as an attachment in your email.

The manual is 2,44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info