468052

JBSystems MCD300 Manual

5
Zoom out
Zoom in
Previous page
1/21
Next page
ENGLISH USER MANUAL
JB SYSTEMS
®
5/37 MCD300
7. ELAPSED, TOTAL REMAIN: indicates that the time shown on the display is the track elapsed,
remaining or total remaining time.
8. PITCH DISPLAY: Shows the percentage change in pitch (speed) of the song.
HOW TO USE …
Most of the common functions are explained in the previous chapter “controls and functions” In this chapter
we talk about the functions that need a little more explanation.
PLAYING MP3 FILES:
The CD player automatically detects if a CD contains MP3 files. The MCD300 is able to read several
different MP3 formats but due to display limitations it can’t show the ID3-tags (song title/performer/…). The
CD may contain up to 999 MP3- files, spread over maximum 255 folders. When the MP3-files are sorted in
separate folders, the MCD300 will list all files as if no folders exist.
The MP3-files may have the following file extensions: .mp3 ~ .MP3 ~ .mP3 ~ .Mp3
Check the technical specifications to see which MP3-files are allowed.
PLAYING CD-R and CD-RW:
Apart from normal audio CD’s the MCD300 can play both CD-R (CD recordable) and CD-RW (CD
rewriteable). Please note that you should always use the “disc at once” and “track at once” disc writing
options! If the disc is multi session, it will only play the first session:
o if the first session is CD-DA you can only play CD-DA tracks.
o if the first session is MP3 you can only play MP3 files.
SLEEP MODE:
The CD player automatically shuts off the transport and laser after about 15 minutes (when in pause or
cue mode). This extends the life of your motor drive and laser. During sleep mode the display shows the
word “SLEEP”. To wake up the player, just press the cue or play button, the display turns to normal and is
ready to receive instructions.
STORING A CUE POINT:
Put the player in pause and use the jog/shuttle wheel to search the exact location for the cue point. Once
this location is found, press the PLAY/PAUSE button to set the new cue point. (the cue led flashes 2 times
to indicate that the new cue point is set and the track starts playing from this new cue point)
Once the cue point is programmed, just press the CUE button to recall it.
PITCH BENDING:
This function is used to put the beats of two tracks in perfect sync. This can be done in two ways:
PITCH BEND buttons: The speed increases or decreases respectively as long as the PITCH BEND+ or
PITCH BEND- button is pressed.
JOG WHEEL: During play mode the JOG WHEEL will temporarily bend the pitch of the music by turning
the JOG WHEEL clockwise to speed up or counterclockwise to slowdown. The rotation speed the JOG
WHEEL determines the percent of pitch bend.
ENGLISH USER MANUAL
JB SYSTEMS
®
6/37 MCD300
SPECIFICATIONS
Power Supply: AC 230 V, 50Hz
Power Consumption: 14W
Output level: 2.0Vrms +/1dB @ 1kHz
Frequencyresponse: 20-20.000Hz(+/-0.4dB)
THD + noise: 0.006% @ 1kHz, 0dB
S/N Ratio (IHF-A): >102dB @ 1kHz.
Shortaccess time (next track): <2sec
Long access time (track 1 20): <4sec
Laser Pickup: Sony KSM-213CCM 3spotdetection 780nm
Electronictracking: Full automatic digital tracking.
DISC FORMAT:
Possible file extensions: .mp3 ~ .MP3 ~ .mP3 ~ .Mp3
ISO9660: Level1 (max. 8”/8.3” character style)
Level2 (max. 31/30 character style)
Joliet: max. 64/64 character style
CD-ROM sector format: mode-1 only
Max. Folders: 255
Max. Files: 999
Max. Files/Folder: 255
MP3 FORMATS:
MPEG1Layer3 (ISO/IEC11172-3): mono / stereo sampled at: 32 - 44,1 - 48kHz
Bitrates: 32 – 320Kbps
Bitrate modes: CBR (Constant Bitrate) or VBR (Variable Bitrate)
MPEG2Layer3 (ISO/IEC13818-3): mono / stereo sampled at: 16 – 22,05 - 24kHz
Bitrates: 8 – 160 Kbps
Bitrate modes: CBR (Constant Bitrate) or VBR (Variable Bitrate)
MPEG2,5 Layer3: mono / stereo sampled at: 8 – 11,025 - 12kHz
Bitrates: 8 – 160 Kbps
Bitrate modes: CBR (Constant Bitrate) or VBR (Variable Bitrate)
Dimensions: 482(W) x 88.8(H) x 268(D) mm
Weight: 4.5Kgs
Every information is subject to change without prior notice
You can download the latest version of this user manual on our website: www.beglec.com
… 5 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JBSystems MCD300 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JBSystems MCD300 in the language / languages: English, German, Dutch, French, Portuguese, Spanish as an attachment in your email.

The manual is 0,73 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info