Manual JBSystems MCD300 (page 3 of 21) (English, German, Dutch, French, Portuguese, Spanish)

468052

Zoom out

Zoom in

1/21

ENGLISH OPERATION MANUAL

JB SYSTEMS

1/37 PRODUCT NAME

Thank you for buying this JB Systems

product. To take full advantage of all possibilities, please read these

operating instructions very carefully.

FEATURES

This unit is radio-interference suppressed. This appliance meets the requirements of the current European

and national guidelines. Conformity has been established and the relevant statements and documents have

been deposited by the manufacturer.

 Full MP3 Playback (max. 999 MP3-files / 255 Folders on 1 CD)

o MPEG1 layer3 (32 + 44,1 + 48kHz)

o MPEG2 layer3 (16 + 22,05 + 24kHz)

o MPEG2.5 layer3 (8 + 11,025 + 12kHz)

 Supports both CBR and VBR bit rate modes.

 Reads CD-DA, CD-R, CD-RW

 Anti-shock Memory 10seconds

 1/75sec Frame search, also on MP3

 Pitch ranges: +/-8% +/-12% +/-16%, also on MP3

 Pitch bend on jog wheel and buttons for perfect mixes

 Auto cue function (-48dB)

 4 different speed scan

 Selectable elapsed, remain and total remain time display

 Pitch display.

 Single/continuousplay

 S/PDIF digital output on RCA/cinch

 60 seconds Transport Protection

 20 tracks program play

BEFORE USE

Check the contents:

Check that the carton contains the following items:

 MCD300 player

 Operatinginstructions

 Pair of cinch cords

SAFETY INSTRUCTIONS:

CAUTION: To reduce the risk of electric shock, do not remove

the top cover. No user-serviceable parts inside. Refer

servicing to qualified service personnel only.

The lightning flash with arrowhead symbol within the equilateral triangle is intended to alert the use

or the presence of un-insulated “dangerous voltage” within the product’s enclosure that may be of

sufficient magnitude to constitute a risk of electric shock.

The exclamation point within the equilateral triangle is intended to alert the user to the presence of

important operation and maintenance (servicing) instructions in the literature accompanying this

appliance.

This symbol means: indoor use only.

This symbol means: Read instructions.

This symbol means: Safety Class II

appliance

CAUTION

ENGLISH USER MANUAL

JB SYSTEMS

2/37 MCD300

 To prevent fire or shock hazard, do not expose this appliance to rain or moisture.

 To avoid condensation to be formed inside, allow the unit to adapt to the surrounding temperatures when

bringing it into a warm room after transport. Condense sometimes prevents the unit from working at full

performance or may even cause damages.

 This unit is for indoor use only.

 Don’t place metal objects or spill liquid inside the unit. No objects filled with liquids, such as vases, shall be

placed on this appliance. Electric shock or malfunction may result. If a foreign object enters the unit,

immediately disconnect the mains power.

 No naked flame sources, such as lighted candles, should be placed on the appliance.

 Don’t cover any ventilation openings as this may result in overheating.

 Prevent use in dusty environments and clean the unit regularly.

 Keep the unit away from children.

 Inexperienced persons should not operate this device.

 Maximum save ambient temperature is 40°C. Don’t use this unit at higher ambient temperatures.

 Minimum distances around the apparatus for sufficient ventilation is 5cm.

 Always unplug the unit when it is not used for a longer time or before you start servicing.

 The electrical installation should be carried out by qualified personal only, according to the regulations for

electrical and mechanical safety in your country.

 Check that the available voltage is not higher than the one stated on the rear panel of the unit.

 The socket inlet shall remain operable for disconnection from the mains.

 The power cord should always be in perfect condition. Switch the unit immediately off when the power cord

is squashed or damaged. It must be replaced by the manufacturer, its service agent or similarly qualified

persons in order to avoid a hazard.

 Never let the power-cord come into contact with other cables!

 When the power switch is in OFF position, this unit is not completely disconnected from the mains!

 In order to prevent electric shock, do not open the cover. Apart from the mains fuse there are no user

serviceable parts inside.



Never

repair a fuse or bypass the fuse holder.

Always

replace a damaged fuse with a fuse of the same

type and electrical specifications!

 In the event of serious operating problems, stop using the appliance and contact your dealer immediately.

 Please use the original packing when the device is to be transported.

 Due to safety reasons it is prohibited to make unauthorized modifications to the unit.

INSTALLATION GUIDELINES:

 Install the unit in a well-ventilated location where it will not be exposed to high temperatures or humidity.

 Placing and using the unit for long periods near heat-generating sources such as amplifiers, spotlights, etc.

will affect its performance and may even damage the unit.

 The unit can be mounted in 19-inch racks. Attach the unit using the 4 screw holes on the front panel. Be

sure to use screws of the appropriate size. (screws not provided)

Take care to minimize shocks and vibrations during transport.

 When installed in a booth or flight case, please make sure to have good ventilation to improve heat

evacuation of the unit.

 To avoid condensation to be formed inside, allow the unit to adapt to the surrounding temperatures when

bringing it into a warm room after transport. Condense sometimes prevents the unit from working at full

performance.

CLEANING THE APPLIANCE:

Clean by wiping with a polished cloth slightly dipped with water. Avoid getting water inside the unit. Do not

use volatile liquids such as benzene or thinner which will damage the unit.

CONNECTIONS

Except for microphones, headphone and zone outputs, all connections are cinch. Use good quality cinch-

cinch cables to prevent bad audio quality.

For more information on connections, please refer to the next chapter.

Be sure to turn off the mixer before you make changes to the different connections.

In this manual we talk about “line inputs”. This is a global name for inputs with a level between 750mV and

2V. This includes tuners,videos, CD-players, etc.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of JBSystems MCD300 in the language / languages: English, German, Dutch, French, Portuguese, Spanish as an attachment in your email.

The manual is 0,73 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

JBSystems MCD300 Manual

Product: