793354
7
Zoom out
Zoom in
Previous page
1/72
Next page
7
English
www.jbl.com
To bi-wire the S3900, first remove the connector jumper bars as shown in the illustration.
A. Unscrew
all four caps
B. Remove
jumpers
If you’re bi-wiring with a single stereo power amplifier, connect the speakers according to the following illustration.
HF/UHF
Connection
Amplifier
Right
Ch.
Left
Ch. HF/UHF
Connection
LF Connection LF Connection
Right
Speaker Left
Speaker
If you’re bi-amping or bi-wiring with two stereo power amplifiers, connect the speakers according to the following
illustration.
HF/UHF
Connection
Amplifier 1
Amplifier 2
Right
Ch. Right
Ch.
Left
Ch. Left
Ch. HF/UHF
Connection
LF
Connection LF
Connection
Right
Speaker
Left
Speaker
In either case, follow the instructions for the different connector types in Basic Single-Wire Connection, on page 4.
NOTE: For more information about various speaker-wire and connection options, contact your local JBL dealer.
CARINg FOR YOUR SPEAkERS
Wipe the cabinet with a clean, dry cloth to remove dust. A damp cloth may dull the cabinet’s finish. Do not use volatile
liquids such as benzene, paint thinner or alcohol on the cabinet.
Do not spray insecticide near the cabinet.
To remove dust from the grille fabric, use a vacuum cleaner set to low suction.
Do not wash the grille in water, as water may fade the grille’s color or make it uneven.
Never apply suction or pressurized air to the high-frequency or ultrahigh-frequency horn openings.
If the surface of the low-frequency driver cone becomes dusty, you can carefully sweep it clean with a soft, dry
calligraphy brush or paint brush. Do not use a damp cloth.
The grille only fits on the speaker one way, so if you remove the grille, please note the proper orientation of the grille
pins before re-installing the grille on the speaker.
SPECIFICATIONS
JBL® S3900 FLOORSTANDING SPEAKER
Speaker type: 3-way floorstanding
Low-frequency transducer: Two 250mm (10") pure pulp cones with ferrite motor
assemblies
High-frequency transducer: 45mm (1-3/4") compression driver with an Aquaplas-treated
pure titanium diaphragm and neodymium motor assembly
on a SonoGlass® Bi-Radial® horn
Ultrahigh-frequency transducer: 19mm (3/4") compression driver with a pure titanium
diaphragm and neodymium motor assembly on a
SonoGlass® Bi-Radial® horn
Maximum recommended amplifier power: 250 watts
Frequency response: 32Hz – 40kHz (–6dB)
Nominal impedance: 6 ohms
Sensitivity: 92dB (2.83V/1m)
Crossover frequencies: 850Hz, 12kHz
Enclosure type: 25mm (1")-thick MDF stock, ported
Connector type: Dual gold-plated five-way binding posts
Dimensions (H x W x D): 1001mm x 370mm x 368mm
(39-13/32" x 14-9/16" x 14-1/2")
Weight: 39.2kg (86.3 lb)
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JBL S3900 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JBL S3900 in the language / languages: English as an attachment in your email.

The manual is 12.39 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info