793354
5
Zoom out
Zoom in
Previous page
1/72
Next page
5
www.jbl.com
English
Using Bare Wire or Pin Connectors:
A. Unscrew Cap B. Insert Bare Wire
or Pin Connector
through Hole in Post
C. Tighten Cap
to Secure Wire
IMPORTANT: Make sure the “+” and “–” wires or pins do not touch each other or the other connector. Touching wires
can cause a short circuit that can damage your receiver or amplifier.
Using Spade Connectors:
A. Unscrew Cap C. Tighten Cap to
Secure Spade
Connector
B. Insert Spade
Connector Blades
around Post
IMPORTANT: Make sure the “+” and “–” spade connector blades do not touch each other or the other connector.
Touching blades can cause a short circuit that can damage your receiver or amplifier.
Using Banana Connectors:
A. Tighten Cap B. Insert Connector
BI-WIRE CONNECTION:
The S3900 connection assembly has two sets of input connectors that are connected by jumper bars. The upper set
of connectors is for the high-frequency/ultrahigh-frequency drivers, and the lower set of connectors is for the woofers.
High-Frequency/
Ultrahigh-Frequency
Connectors
Low-Frequency
Connectors
Jumper
Bars
This arrangement allows you to bi-wire the speakers using a single stereo power amplifier or to bi-amp the speakers
using two stereo power amplifiers. Bi-wiring and bi-amping can offer performance advantages and more flexibility in
power-amplifier selection over a conventional single-wire connection.
NOTE: The hole in the connector post is
5mm in diameter. Please use speaker cable
or a connector pin with an external diameter
of less than 5mm.
NOTE: The connector post is 8mm in
diameter. Please use a spade connector
with an inside diameter of more than 8mm.
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JBL S3900 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JBL S3900 in the language / languages: English as an attachment in your email.

The manual is 12.39 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info