793352

JBL Project Everest DD67000 Manual

14
Zoom out
Zoom in
Previous page
1/26
Next page
27
Speaker wire and interconnecting cables are an important
component in any audio system. With a system like Project
Everest, they assume an increased level of importance.
Project Everest loudspeakers are internally wired using high-
quality oxygen-free copper wiring. The same care that was
given to the selection of the loudspeakers’ internal system wiring
should be afforded to the selection and application of the wires
that will connect the Project Everest loudspeakers to your other
system components.
Many manufacturers produce audiophile speaker wire worth
considering for Project Everest loudspeakers. As with all electronics
and associated components, however, every manufacturer
offers products of varying quality to suit a range of budgets and
applications. We advise that you use high-quality wire and to
select the highest grade of wire available from the manufacturer.
Project Everest specialist dealers have the experience and
knowledge to recommend suitable speaker wire to best
complement your particular system. We recommend using an
audiophile-quality speaker wire of not less than 16-gauge for
connections of up to 15 feet (5 meters) as a minimum requirement.
For maximum signal purity, we advise that you place the
amplier(s) as close as possible to the loudspeakers, even if
this means that a longer distance will be needed between the
amplier(s) and preamplier.
The connections between the left and right ampliers and
speakers should be the same length. If the distance between one
speaker and its amplier(s) is greater than the distance between
the other speaker and its amplier(s), use the longer length of wire
for both connections.
For bi-wire connections, the same type of wires may be used for
both low-frequency and high-frequency sections to reduce wire
effects (resistance, inductance, etc.) and to avoid intermodulation
of low and high frequencies in the wires. Specialized wires for
low-frequency and high-frequency sections may yield excellent
results. Whatever wires you select, be sure that the low-frequency
wires are as short as possible, and that the left and right wires for
each section are the same length.
SELECTING
SPEAKER WIRE
4
… 14 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JBL Project Everest DD67000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JBL Project Everest DD67000 in the language / languages: English as an attachment in your email.

The manual is 17.19 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info