Manual JBL Project Everest DD67000 (page 13 of 26) (English)

793352

Zoom out

Zoom in

1/26

2524

9. Remove the protective wrapping.

INSTALLING SPIKES

Project Everest speakers are shipped with round-tipped feet on

the bottom of the cabinet. If you would like to use pinpoint spikes,

remove the round-tipped feet and replace them with the supplied

pinpoint spikes. If the round-tipped feet are hard to loosen, use an

11/16-inch (18mm) wrench.

IMPORTANT: To prevent damage (scratches, indentations, etc.)

to wood or linoleum oors due to the weight of these speakers,

always use the included coasters. Be especially sure to use the

coasters on tile surfaces to prevent cracking the tile.

REMOVING THE GRILLES

Project Everest loudspeakers are shipped with their grilles installed

on the enclosures. You will need to remove the grilles to access

the adjustment panels when you set up your speakers. You can

remove the grilles with the following procedures.

1. Hold the lower part of the grille with both hands and push it up.

Push bottom of grille UP

2. Pull the bottom of the grille toward you to remove the grille from

the lower pins on the enclosure.

Pull bottom of grille OUT

3. Pull the grille down and remove it from the enclosure.

Pull grille DOWN and remove

Repeat the above steps in reverse order in order to install the

grilles back on the enclosures.

3. Remove the cardboard and packing materials. Remember to

take the accessories out from the upper endpads.

Remove

Accessory

Package

4. Remove the upper endpads.

5. Together with the bottom cardboard, slide the loudspeaker

system down from the bottom board

6. Cut tapes at the corners of the bottom cardboard.

7. Slide the loudspeaker system together with bottom endpads

out toward you.

8. Lift the system slightly on the right and left, in turn, to remove

the bottom endpads.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of JBL Project Everest DD67000 in the language / languages: English as an attachment in your email.

The manual is 17.19 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

JBL Project Everest DD67000 Manual

Product: