Manual JBL Project Everest DD65000 (page 20 of 26) (English)

793353

Zoom out

Zoom in

1/26

PROJECT EVEREST

CONNECTIONS

CAUTION: Turn off all ampliers before connecting or

disconnecting Project Everest loudspeakers. Making

connections while an amplier is operating could seriously

damage the loudspeaker system and void the warranty.

All ampliers must also be turned off before connecting or

disconnecting cables at the amplier or preamplier inputs.

All connections between the amplier(s) and the Project Everest

loudspeaker system are made at the terminals located on the

rear of the enclosure. The left-hand terminals (black rings and

black logos on the terminal knobs) are negative, and the right-

hand terminals (red rings and red logos on the terminal knobs)

are positive. Twisted-pair shorting straps connect the netative

terminals together and the positive terminals together.

Assign one of the two speaker wire conductors as the negative

conductor and the other as the positive conductor. These should

correspond to the negative and positive speaker terminals on

the speaker and amplier. Use these same designations for all

system wiring. Always connect the conductors of the speaker wire

appropriately to the corresponding negative and positive terminals

on all system components: amplier “+” to speaker “+”; amplier

“–” to speaker “–”. This will ensure that all components will work

together in proper polarity (sometimes referred to as “in phase”).

Refer to your receiver’s or amplier’s instruction manual to conrm

its connection procedures. Connecting the loudspeakers with

improper polarity (sometimes referred to as “out of phase”) will not

damage them but will result in reduced low-frequency output and

impaired stereo effect.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of JBL Project Everest DD65000 in the language / languages: English as an attachment in your email.

The manual is 17.19 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

JBL Project Everest DD65000 Manual

Product: