422468
29
Zoom out
Zoom in
Previous page
1/42
Next page
Project Everest DD66000
29
HF Level
This switch adjusts the attenuation applied to the 476Be (high-frequency unit)
by approximately 0.5dB over the range of 1,000Hz to about 8,000Hz. The
action is accomplished by trimming the main attenuation resistors. Midrange
sound becomes softer by reducing the level and stronger by increasing the
level. No additional parts are inserted in the signal path and there is no sonic
deterioration by position or adjustment functions.
LF Level
There is a level trim available for each of the two woofers (LF1 and LF2).
Moving a bar from Low to High will increase the drive level to a portion of
the frequency spectrum over which each woofer operates. LF1 refers to the
low-range woofer (up to 150Hz) and will affect the output level in the range
of 60Hz to 150Hz by about 0.5dB. LF2 refers to the main woofer and will
affect the output level in the range of 150Hz to 700Hz. The purpose of these
adjustments is to allow fine-tuning of the mid-bass and midrange response of
the system to better integrate with varying room characteristics.
Normally, the control bars of LF1/LF2 are moved together to get the maximum
effect (LF1 & LF2 = High, or LF1 & LF 2 = Low). Depending on room
environment, you may get a good balance by moving one of them. In cases in
which the speakers are placed close to corners of the room and the distance
between the two speakers is great and you notice bass boost by reflections from
walls, try to increase the LF1 level and decrease the LF2 level (LF1 = Low,
LF2 = High). The adjustment is accomplished by a change in value of a parallel
damping resistor in each woofer circuit. No series loss is caused by these
controls.
Change from LF1 level trim Change from LF2 level trim
29


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JBL k2 s4800 kersen at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JBL k2 s4800 kersen in the language / languages: English as an attachment in your email.

The manual is 0,58 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info