648494
8
Zoom out
Zoom in
Previous page
1/14
Next page
GTR AMPLIFIERS
4. Remote (GTR-601, GTR-1001, GTR-7535):
Connect an 18awg wire from the “Remote Out” lead of the source unit to the REM input. This lead detects signal and instructs the amplifier to turn on.
(See 12. REM below for remote connection info for the GTR-102 and GTR-104 models.)
GTR REM input power block
5. Front and rear inputs and outputs (RCA):
If your source unit offers preamp outputs, connect to the FRONT, REAR, and/or SUB inputs using RCA patch cables.
To connect a second amp directly to the amplifier, run a patch cable from the PRE OUT outputs to the second amp’s preamp inputs. (Available on
GTR-102 and GTR-104 amplifiers only.)
6. Input level:
Select LO if providing signal to the amp using line-level connections. Select HI1 or HI2 if using speaker-level connections.
7. Crossover-filter selectors (GTR-102, GTR-104, GTR-7535)
Slider switches for selecting high-pass (HP), low-pass (LP), or FULL. GTR-601 and GTR-1001 filters are low pass only.
(See Setting the Crossover in Chapter 4.)
8. Gain:
Use input level controls to match the amp’s input sensitivity to the output level of your source unit. (See Setting the input levels in Chapter 4 for a
recommended adjustment procedure.)
9. Crossover Frequency Controls:
Use crossover-filter frequency controls for adjusting crossover point settings for full-range speakers and subwoofers.
(See Setting the Crossover in Chapter 4.)
10. ADAS Assign (GTR-102, GTR-104, GTR-7535):
When you connect your ADAS system to your GTR amp (cable sold separately), the amp will broadcast your vehicle’s driver assistance messages, such as
lane-departure warnings. By turning the ADAS Assign dial you can select the speaker the messages will be broadcast over. You can choose to hear messages
over your front left or FL (driver’s side), front right or FR (passenger side), rear left, or rear right speaker. Your music will mute when a warning or message is
broadcast, then resume when they’re finished.
11. Controller (GTR-102, GTR-104, GTR-7535):
Connect the supplied remote control panel to the amplifier’s Telephony connector, as shown in the illustration below. The remote control panel includes a long
cable and a mounting flange, allowing it to be mounted in a convenient location in the vehicle’s cabin.
+12V
REM
GND
FRONT
INPUT LEVEL
LO
FRONT
X-OVER
REAR
X-OVER
HI1 HI2
REARPRE OUT
R
L
LPF FULL HPF
LPF FULL HPF
GAIN
FREQ
ADAS ASSIGN
MIN
MINMAX MAX
REAR FRONT
CONTROLLER REM
ADAS
UPGRADE
INPUT
REAR
80Hz 80Hz
32Hz
32Hz320Hz 320Hz
FRONT
FL FR
RL
RR
IN
OUT
5
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JBL GTR-100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JBL GTR-100 in the language / languages: English as an attachment in your email.

The manual is 1,42 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of JBL GTR-100

JBL GTR-100 User Manual - Dutch - 23 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info