422793

JBL everest dd66000 maple Manual

18
Zoom out
Zoom in
Previous page
1/42
Next page
18
Internal Crossover Network
The circuit topology, combined with the acoustic behavior of the 1501AL and
476Be, provides a 24dB-per-octave transition at 700Hz. This is the primary
crossover point of the system. Additionally, the 045Be-1 is turned on above
20kHz to provide extended response to beyond 50kHz. A second 1501AL
woofer is used from below 30Hz to around 150Hz, at which point it is gently
rolled off at 6dB per octave. The design intent is to use both woofers in the bass
frequencies and slowly transition to a single woofer in the midrange. This
technique allows a primary crossover point between just two drivers and
permits proper control of the directivity pattern of the system, while providing
tremendous power and air movement capabilities at the lower frequencies. As a
result, the speed and power of the DD66000 system are unmatched, from the
lowest to the highest frequencies.
All of the electrical components are of the highest quality and exhibit the
lowest internal loss. The inductors used are “air core” so as not to introduce
nonlinear hysteresis effects. Capacitors are constructed using polypropylene
foil, which is known for having minimal distortion caused by dielectric
absorption nonlinearities. The mid-, high- and ultrahigh-frequency networks
employ battery bias to operate the capacitors effectively in a Class A mode.
Every attempt is made to present as smooth a system impedance as possible
to the driving amplifier. This design element is often overlooked in many
loudspeaker systems, yet amplifiers work their best when they are given a
smooth, level load impedance in which to deliver current
(Fig. 5).
Figure 5 – DD66000 system impedance
The aggregate of these attributes allows the DD66000 system to translate the
electrical signal from source material into an accurate and unencumbered three-
dimensional sound field. The system can do this at any desired listening level,
from whisper-quiet to big-band loud, while at the same time maintaining
unchanged acoustic characteristics.
… 18 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JBL everest dd66000 maple at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JBL everest dd66000 maple in the language / languages: English as an attachment in your email.

The manual is 0,58 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info