422793

JBL everest dd66000 maple Manual

16
Zoom out
Zoom in
Previous page
1/42
Next page
16
A high-purity copper sleeve is used for the polepiece. This greatly improves the
electrical conductivity of the copper sleeve for lower coil inductance and thus
greater high-frequency output at 15kHz and above. The copper-sleeved pole
quickly wicks away heat generated by the coil, thereby contributing to a
reduction in dynamic power compression. To compensate for the higher
resistance caused by the use of a copper-sleeved polepiece, a large magnet area
has been used, in conjunction with special high-grade and high-temperature-
grade neodymium.
The phasing plug is of JBL’s traditional rapid-flare, coherent-wave four-slot
design. This coherent-wave design shapes the wave output, producing a truly
coincident wave front as the sound enters the Bi-Radial horn. The diaphragm
is formed of pure beryllium foil that is manufactured with a proprietary high-
temperature and pressure-forming process. This process enables the integrated
JBL diamond-pattern surround to be formed as one piece with the dome.
Compared to other methods, forming the diaphragms out of sheets of
beryllium foil yields greater reliability and resistance to failures due to fatigue.
If breakage ever does occur, the diaphragm does not shatter into pieces or
harmful dust. Beryllium has a stiffness-to-density ratio of about five times that
of aluminum, magnesium, titanium and iron. This maintains pistonic behavior
up to 20,000Hz, eliminating diaphragm modal breakup and keeping the upper
frequency response very smooth, with minimal distortion spikes. Compared
to the 475Nd compression driver used in JBL’s original K2 S9500 system,
this is about a 45 percent reduction in moving mass. With such a low mass,
the moving assembly is able to respond even quicker to musical transients,
to further enhance detail and microdynamic nuances.
JBL’s proprietary diamond-pattern surround is utilized to maintain proper
control and tuning of the second diaphragm resonance (the surround resonance
mode). The proper control and placement of this surround resonance is critical
for good high-frequency shape, extension and level.
These features, when taken as a whole, create a new large-format compression
driver with the greatest high-frequency extension, lowest distortion, smoothest
response and greatest sonic detail.
… 16 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JBL everest dd66000 maple at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JBL everest dd66000 maple in the language / languages: English as an attachment in your email.

The manual is 0,58 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info