810152
24
Zoom out
Zoom in
Previous page
1/35
Next page
24
In general, most users will leave this setting turned on, in case power is accidentally dropped in between
the soundcheck AFS Fixed lter setup and the event. Groups that move speakers to new locations often
may desire to set this feature off, as each location has different feedback challenges, which previous Fixed
lters would not assist.
5. The Main EQ is a package of lter adjustments on the main mix before the audio feeds to the amp and speaker.
It includes a collection of easy to select preset curves for common speech and music styles. Each preset can
also be loaded into the Custom preset for detailed user-adjustable of output parametric EQs. The user has
adjustments for individual band level, frequency, and width (“Q”).
a. “Main EQ” On/Off enables or bypasses the current settings in the Main EQ processor.
b. “Reset” selection resets the Main EQ to at, as the default Main EQ setting when shipped.
c. Presets 8x” enables rotation of the Main/Menu knob to view and select from the Main EQ presets.
i. Scroll the menu to “Presets 8x” and press the MAIN/MENU knob.
ii. Rotate the MAIN/MENU knob to view the available presets.
iii. Click the MAIN/MENU knob to load the currently showing preset.
iv. Users can load the Custom preset, then double click the Main/Menu knob to open the Main EQ
editing page. Inside this graph display page, you may rotate the Main/Menu knob to a specic
parametric EQ number and click the Main/Menu knob again to select to edit the gain (plus or minus
in dB), lter frequency, or “Q” (i.e. adjust the lter width.)
. Users can load any preset as a starting point, then scroll down and adjust any setting to load
the current curve as the Custom preset for further editing. A conrmation dialog will
appear, warning the user that doing this will remove the current Custom preset
settings and load it with the currently viewed settings.
6. The Output Limiter provides a “brick wall” limiter on the main mix, after the Main EQ in the signal chain.
a. Limiters reduce the loudest parts of the mix dynamic range. Limiters can be used either for protection
when playing very loud source material, or to creatively sculpt down the loudest dynamics of the main mix.
Carefully turn up the Makeup Gain to compensate for low threshold limiter results.
b. “Reset” is an action command to reset the Output Limiter to the factory default setting.
c. Presets” are available to recall limiter settings for common creative situations or trouble shooting.
i. If the user selects any of the lower three settings to edit, the preset automatically loads the lower
three settings to the Limiter “Custom” preset for further user editing.
d. “Threshold” enables the user to set the threshold level, limiting the maximum mix level to amp and
speakers. All dynamic range above that level will be limited down to the maximum Threshold setting.
e. “OverEasy” an Enabling “OverEasy” smooths the transition before the signal reaches the Threshold level
to provide a smooth limiting audio result. “OverEasy” is often selected on rock ballads or speaking panels.
Turning off OverEasy is often desired on harder rock or DJ style of music program.
f. “Makeup Gain” can be used to raise a limited mix to pre-limiter levels. Warning: Using limiter “Makeup
Gain” on already loud mixes may exceed desired mix gain levels. This setting is best used only by skilled
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JBL EON One MK2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JBL EON One MK2 in the language / languages: English as an attachment in your email.

The manual is 4.72 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info