810152
26
Zoom out
Zoom in
Previous page
1/35
Next page
26
Time alignment is not perfect as not all audience positions measure the same speaker distance
differences.
iii. “Delay Pass Thru Out” Using this delay will place speaker delay on the PASS THRU Output.
iv. “Delay This Speaker” Using this delay will place the delay on the INPUT of the mixer of the current
speaker.
Channel Menu
1. The channel menu can be accessed by pressing the rotary knob of the respective channel you wish to access.
The active channel is visible at the top line of the LCD as well as by the dynamic LED below the respective
channel number..
a. The MUTE eld will mute the respective channel.
i. While in mute, the SSM LED of the muted channel will fade RED.
ii. You can also MUTE a channel by holding the respective channel knob for 2s.
b. Channels 1-2 offers users +48v of Phantom Power. You can engage this in the Channel Menu section.
Please refer to the Phantom Power section of this guide for more information.
c. The Input EQ section accesses the xed and parametric EQ for each channel. The input channel EQs are
lter adjustments on the audio input channels.
i. Presets include a collection of easy to select preset curves for common creative uses.
ii. Input channel EQ’s include a high pass lter for reducing the combined low-frequency energy build-
up on stage, Bass/Middle/Treble simple controls that can be adjusted on the hardware channel knobs
or LCD screen, and parametric EQ bands with individual gain, frequency, and width (“Q”) for ne lter
editing control.
iii. “Channel #” On/Off enables or bypasses the input channel EQ processor.
iv. “Reset” Selecting the “Reset” sets the input channel EQ to factory default, i.e. at curve.
v. “Presets 8x” opens the user selection of Input EQ presets.
. Users can rotate the Main/Menu knob to see the available input EQ presets.
. Click the Main/Menu knob to load the current showing preset.
. With any input EQ preset showing, users can double click the Main/Menu knob to open the
input EQ editing page.
. Inside the EQ editing page, rotate the Main/Menu knob to select the HPF (high pass lter), the
Bass/Middle/Treble controls, or select any parametric EQ band number and click the knob to
load editing on that band.
. On Parametric EQ bands, rotate and select different settings to edit, including gain (plus or
minus in dB), lter frequency, or “Q” (i.e. adjust the lter width.)
vi. To access the channel EQ settings, rotate the MAIN/MENU knob to the INPUT EQ eld and PRESS
26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JBL EON One MK2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JBL EON One MK2 in the language / languages: English as an attachment in your email.

The manual is 4.72 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info