650510
34
Zoom out
Zoom in
Previous page
1/243
Next page
30
Stopcock lever on the pump head stiff
Cause Solution
The O-rings no longer glide
Dismantle the hose connection block (7) and
spray the stopcock ball valves with commercially
available silicone oil. Reassemble the hose
connection block and move the stopcock lever
back and forth a few times.
Fish dead and/or water cloudy
Cause Solution
Nitrite poisoning due to too rapid change from
old” to new“. Cleansing bacteria disposed of with
old lter.
Run the old lter and new lter parallel in the
same aquarium for 2 weeks or incorporate 1/3 of
the old lter media in the new lter. Never carry
out an over-all clean up” of the aquarium all at
once!
Filter media for problem solutions (available at your specialist retailer)
12
Filter material to use with foam edge
The following filter materials are most effective in a relatively slow water flow. In the e-series
JBL
CRISTALPROFI
©
filters, a slow water flow is achieved by a two-stage principle. The filter foam
F3 (JBL UniBloc) is pre-cut so that an oval core area can be taken out and replaced by special
filter media in finely meshed net bags. Optimal efficiency is thus achieved by the water flowing
slowly through the special filter media, whilst at the same time the medium-sized pore struc
-
ture of the foam edge means that the overall water flow through the filter is obstructed as little
as possible. The following filter materials are suitable for this purpose:
JBL CarboMec - High-capacity active carbon
Removes residue medication, water discolouration and high molecular pollution from fresh
water and salt water. Virtually no increase in conductivity and phosphate levels in the water.
JBL PhosEx ultra - Solves algae problems by reliably removing phosphate
Prevents and eliminates undesirable algae growth by removing the main nutrient, phos-
phate, from fresh water and salt water.
JBL NitratEx - Nitrate remover
Eliminates nitrate from fresh water. Prevents and eliminates the growth of undesirable algae
by reliably removing the nutrient, nitrate, from fresh water. Exchange resin can be regener-
ated with cooking salt.
JBL ClearMec - Pollutant remover for crystal-clear water without algae trouble
A mixture of clay pellets and special resins removes the pollutants, phosphate, nitrate and
nitrite, from fresh water, thereby preventing undesirable algae growth. The clay pellets pro-
34


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JBL Cristalprofi e402 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JBL Cristalprofi e402 in the language / languages: All languages as an attachment in your email.

The manual is 4,5 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info