650510

JBL Cristalprofi e402 Manual

26
Zoom out
Zoom in
Previous page
1/243
Next page
22
the middle of the basket. Simple plug-in assembly. The retaining lugs snap into place by
themselves.
Before you fit the pump head, biologically activate the filter media with JBL FilterStart
cleansing bacteria (available at your specialist retailer) as follows:
Empty the complete contents of the required number of bottles of JBL FilterStart over the
pre-filter media in the combi filter basket.
Number of bottles of JBL FilterStart:
CristalProfi e402: 1 bottle
CristalProfi e702: 1 bottle
CristalProfi e902: 2 bottles
CristalProfi e1502: 3 bottles
CristalProfi e1902: 4 bottles
Put the pump head back on the filter canister and close the locking clips. Make sure that the
intake opening is properly seated at the pump head of the combi filter basket II.
Please note: The empty filter baskets are interchangeable (excepting e402). However, the
combi filter basket is the only one that can be inserted last on top. The pump head can be
turned 180° in any direction.
The combi filter basket II likewise needs to be turned 180° so that the intake openings fit
together again. When the pump head is unintentionally incorrectly positioned the clips at
the canister don’t lock. In this case do not use force, but turn either the pump head or the
combi filter basket 180°.
Tip: Always open and close clips positioned opposite each other. This prevents unnecessary
wear on the pump head seal and ensures an accurate fit when the filter canister is closed.
2
Attaching the hose connection block and hoses
Turn the two small stopcock levers on the pump head to the (●) position opposite the
“OPEN” mark, so that the groove in the base of the levers points vertically upwards.
Place the hose connection block with the middle lever pointing upwards into the pump
head and press it down firmly.
To fasten, press the middle lever down to secure and turn the two small stopcock levers to the
“OPEN” position. Now the ball valves integrated in the hose connection block are open and
the hose connection block cannot be removed, even if the middle lever is raised (safety lock).
Push each hose onto a hose connection and turn the nut anti-clockwise until the hose fits
firmly.
3
Positioning the filter
The filter can now be positioned in the intended place for use in the aquarium cabinet or
similar. Attention must be paid to the following: If the filter is to be housed in the cabinet,
the distance in height between the surface of the water and the bottom of the filter may not
exceed 180 cm max. (max.120 cm for the e402). If the filter is located next to the aquarium,
… 26 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JBL Cristalprofi e402 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JBL Cristalprofi e402 in the language / languages: All languages as an attachment in your email.

The manual is 4,5 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info