809537
6
Zoom out
Zoom in
Previous page
1/12
Next page
6
MOUNTING THE SATELLITES ON OPTIONAL FLOOR STANDS
Important Safety Note:
The supplied floor stand
adaptors facilitate installation
with a variety of general-
purpose floor stands available
from many manufacturers.
Since different stands will
have different weight capaci-
ties and stability characteris-
tics, it is the customer’s
responsibility to check with
the stand manufacturer or
dealer to ascertain whether
that specific stand is capable
of handling the weight and
proportions of these loud-
speakers in a safe and stable
manner. JBL disclaims any
liability for the selection
of suitable floor stands
and/or correct compatibility
between the selected stand
and the supplied stand
adaptor.
The floor stand adaptors are
compatible with floor stands
equipped with a 1/4"-20
threaded insert.
Using a suitable bolt supplied
with the stand (or by you),
attach the floor stand adaptor
to the stand by screwing the
bolt through the hole in the
bottom tab of the adaptor and
into the threaded insert at the
top of the stand. Orient the
adaptor so that the upright
portion faces toward the
listening position.
Prepare the speaker wire
as described on page 8, and
thread it through the floor
stand’s wire management
system (if any), as instructed
in the owner’s guide for the
stands. Make sure to pre-
serve the proper polarity
(+ and – connections).
Use the supplied terminal
wrench to loosen the red col-
lar of the binding post until
the pass-through hole under-
neath it is revealed. Insert the
bare end of the positive wire
through the hole, then screw
the collar down until it is
tight. Follow the same proce-
dure to connect the negative
wire to its terminal.
Slowly lower the mounting
bracket on the satellite onto
the top of the floor stand
adaptor until the metal spring
clip engages in the squarish
opening on the front of the
adaptor.
Gently pull the slack out of
the wire, and slide the floor
stand cover over the adaptor
for a smooth appearance.
CV OM 5/14/04 3:37 PM Page 6
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JBL CINEMA VISION CVSAT50 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JBL CINEMA VISION CVSAT50 in the language / languages: English as an attachment in your email.

The manual is 0.72 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info