Manual JBL CINEMA VISION CVSAT50 (page 5 of 12) (English)

809537

Zoom out

Zoom in

1/12

MOUNTING OPTIONS

On shelves using the optional

CVTS50 table stands. On the wall. Wall brackets are

included. On compatible floor stands avail-

able from other manufacturers,

using the supplied floor stand

adaptors.

SATELLITES AND SURROUNDS

Important Safety Notes:

•The table stand consists of

two main parts: a metal col-

umn and a glass base. Be

extremely careful in han-

dling the fragile glass base

to avoid breakage that

might result in personal

injury.

•The CVTS50 table stands

are only intended for use

with the CVSAT50 speaker.

Attempting to use the

stands with any other model

speaker is unsafe and may

result in personal injury and

damage to the equipment.

•The stands must be placed

in a safe location, protected

from young children and

pets who might topple the

stands, possibly resulting in

serious injury. Never place

the stand so that any part of

it is sticking out over the

edge of the table, shelf or

other surface underneath it.

•Do not install the CVSAT50

or any other speaker on the

table stand in a horizontal

orientation, as this would be

unstable and might result in

personal injury.

Carefully insert the glass base

into the slot in the column,

lining up

the holes in the base with the

holes in the bottom of the col-

umn. Screw in the bolts, mak-

ing sure the plastic washers

are between the bottom of

the glass base and the bolt

heads. Tighten the bolts

securely using a Philips

screwdriver (not supplied).

Do not overtighten, as this

might strip the threads,

which is not covered by

the warranty.

Prepare the

speaker wire

as described

on page 8.

Remove the

rubber strip

from the back

of the column,

revealing the

wire-manage-

ment channel.

Thread the

two conduc-

tors through the hole at the

top of the channel. Make sure

to preserve the proper polar-

ity (+ and – connections) by

placing the positive conduc-

tor on the left, and the nega-

tive conductor on the right,

looking at the front of the

stand column.

Use the supplied terminal

wrench to loosen the red col-

lar of the binding post until

the pass-through hole under-

neath it is revealed. Insert the

bare end of the positive wire

through the hole, then screw

the collar down until it is tight.

Follow the same procedure

to connect the negative wire

to its terminal. Slowly lower

the mounting bracket on the

satellite onto the top

of the metal col-

umn of the CVTS50

stand. Gently pull

the slack out of the

wire. Carefully

press the rubber

strip in place over

the wire-manage-

ment channel,

being careful to

keep the speaker

wire in the channel

and to avoid pinch-

ing it with the rubber strip.

ATTACHING THE CVTS50 TABLE STAND (AVAILABLE

SEPARATELY) TO THE CVSAT50

CV OM 5/14/04 3:06 PM Page 5

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of JBL CINEMA VISION CVSAT50 in the language / languages: English as an attachment in your email.

The manual is 0.72 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

JBL CINEMA VISION CVSAT50 Manual

Product: