809548

JBL CINEMA SOUND CSB6 Manual

7
Zoom out
Zoom in
Previous page
1/12
Next page
7
www.jbl.com
English
SpEAkER CONNECtIONS
CONNECTION TIPS
Separate and strip the ends of the speaker wire as shown. Speakers and other electronic components have
corresponding (+) and (–) terminals. Most manufacturers of speakers and electronics, including JBL electronics, use
red to denote the (+) terminal and black to denote the (–) terminal.
The (+) lead of the speaker wire is noted with a stripe. It is important to connect both speakers identically: (+) on the
speaker to (+) on the amplifier and (–) on the speaker to (–) on the amplifier. Wiring “out of phase” results in thin sound,
weak bass and a poor stereo image.
With the advent of multichannel surround sound systems, it is equally important to connect all of the speakers in your
system with the correct polarity in order to preserve the proper ambience and directionality of the sound.
CST56
To provide a neater installation, the CST56 allows you to insert the speaker wires through holes in the base. Simply
separate and strip the wires as described above, loosen the terminals and insert each wire into its corresponding hole
in the base. Then tighten down the terminals.
The hole in the center of each collar is intended for use with banana-type connectors. To comply with European CE
certification, these holes are blocked with plastic inserts at the point of manufacture. To use banana-type connectors
requires the removal of the inserts.
CSB6, CSC56
To use the binding-post speaker terminals, unscrew the colored collar until the pass-through hole in the center
post is visible under the collar. Insert the bare end of the wire through this hole; then screw the collar down until the
connection is tight. The hole in the center of each collar is intended for use with banana-type connectors. To comply
with European CE certification, these holes are blocked with plastic inserts at the point of manufacture. To use banana-
type connectors requires the removal of the inserts.
… 7 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JBL CINEMA SOUND CSB6 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JBL CINEMA SOUND CSB6 in the language / languages: English as an attachment in your email.

The manual is 1.82 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info