756980

JB systems EZ-CON 192 Manual

11
Zoom out
Zoom in
Previous page
1/16
Next page
ENGLISH USER MANUAL
JB SYSTEMS® 9/12 EZ-CON 192
a. Switch the unit off with the power switch (35).
b. Switch (35) the unit back on while you press and hold down the [BANK ▲/▼] (14) and
[AUTO/DEL] (8) buttons at the same time. All chases should be cleared.
Note: Be aware that all your chases will be lost, to be used with care!
2. PROGRAMMING A CHASE:
a. Enter program mode (Press and hold the [PROGRAM] (25) button until its LED blinks)
b. Verify that the [BLACKOUT] LED (17) is not blinking. If it is, press the [BLACKOUT] (17) button
once to exit blackout mode.
c. Press the button (15) of the chase you wish to program.
d. Press the [BANK ▲/▼] (14) buttons to select the bank containing the scene(s) you wish to
program in your chase.
e. Press the button (6) of the desired scene.
f. Press the [MIDI/REC] (26) button.
g. Repeat steps d to g until all desired scenes have been entered.
h. Press and hold the [PROGRAM] (25) button for some seconds to exit program mode. The LED
will turn off.
3. INSERT A CHASE STEP:
a. Enter program mode (Press and hold the [PROGRAM] (25) button until its LED blinks)
b. Verify that the [BLACKOUT] LED (17) is not blinking. If it is, press the [BLACKOUT] (17) button
once to exit blackout mode.
c. Press the button (15) of the chase you wish to program.
d. Press the [TAP/DISPLAY] (16) button, the LCD display (12) will show the current chase step.
e. Press the [BANK ▲/▼] (14) button and scroll to the step you wish to insert the step after.
f. Press the [MIDI/REC] (26) button, the segment display will read the step one step higher than
before. The display (12) shows the current chase, scene, and bank.
g. Press the [BANK ▲/▼] (14) buttons to select the bank containing the scene you wish to insert
in your chase.
h. Once you have selected the scene you wish to insert, press the [MIDI/REC] (26) button again.
All LEDs will blink three times indicating the new step has been inserted into the chase.
i. Repeat steps e to h until all desired scenes have been inserted.
j. Press and hold the [PROGRAM] (25) button for some seconds to exit program mode. The LED
will turn off.
4. DELETE A CHASE STEP:
a. Enter program mode (Press and hold the [PROGRAM] (25) button until its LED blinks)
b. Verify that the [BLACKOUT] LED (17) is not blinking. If it is, press the [BLACKOUT] (17) button
once to exit blackout mode.
c. Press the button (15) of the chase that contains the step you want to delete.
d. Press the [TAP/DISPLAY] (16) button, the display (12) shows the current step.
e. Press the [BANK ▲/▼] (14) buttons and scroll to the step you wish to delete.
f. Press the [AUTO/DEL] (8) button to delete the step. All LEDs will flash three times indicating
the requested operation has been performed.
g. Eventually repeat steps e and f until all desired steps have been deleted.
h. Press and hold the [PROGRAM] (25) button for some seconds to exit program mode. The LED
will turn off.
5. ADDING A BANK OF SCENES TO A CHASE:
Note: The bank of scenes will be added at the end of the chase.
a. Enter program mode (Press and hold the [PROGRAM] (25) button until its LED blinks)
b. Verify that the [BLACKOUT] LED (17) is not blinking. If it is, press the [BLACKOUT] (17) button
once to exit blackout mode.
c. Press the button (15) of the chase you wish to edit.
d. Use the [BANK ▲/▼] (14) button to select the bank of scenes you wish to add.
… 11 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JB systems EZ-CON 192 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JB systems EZ-CON 192 in the language / languages: English as an attachment in your email.

The manual is 1,14 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of JB systems EZ-CON 192

JB systems EZ-CON 192 User Manual - German - 20 pages

JB systems EZ-CON 192 User Manual - Dutch - 20 pages

JB systems EZ-CON 192 User Manual - French - 20 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info