497793

JB systems CMX-24 Manual

11
Zoom out
Zoom in
Previous page
1/49
Next page
ENGLISH OPERATION MANUAL
JB SYSTEMS
®
17/93 CMX24
To increase the intensity of the channels:
o Press and hold the <UP/CHASEREV> button
o Press and hold the <PRESET A x> button for channels 1 to 12. Use the <PRESET B x>
button for channels 13 to 24.
o You will see that the intensity will slowly increase on your display (and your fixtures)
o Release the buttons as soon as you have reached the desired intensity.
To decrease the intensity of the channels:
o Press and hold the <DOWN/BEAT REV> button
o Press and hold the <PRESET A x> button for channels 1 to 12. Use the <PRESET B x>
button for channels 13 to 24.
o You will see that the intensity will slowly derease on your display (and your fixtures)
o Release the buttons as soon as you have reached the desired intensity.
Repeat these steps till you have the desired settings
To exit the edit mode:
o Press and hold the <RECORD/SHIFT> button
o Press and release the <KILL/REC EXIT> button
o Release the <RECORD/SHIFT> button
o The normal output of the controller is shown again
!! The modifications will be stored directly; there is no possibility to undo the modifications.
B. Add scenes:
This method gives you the possibility to add a new scène to the chase. Repeat this method to add several
scenes.
Be sure that the program mode is activated.
Be sure that Chase/Scenes is activated.
Bring all the Preset B faders to their lowest position
Clear the working memory:
o Press and hold the <RECORD/SHIFT> button
o Press and release the <PAGINA/RECCLEAR> button
o Release the <RECORD/SHIFT> button
Set the new scene, so that it appears on the green leds (and fixtures), eventually in Single
Preset mode to be able to use 24 channels
Press and hold the <RECORD/SHIFT> button. The scene is now recorded in the working
memory
If you have activated the Single Preset mode to compose scenes, you have now to activate
again the Chase/Scenes mode.
Bring all the Preset A and B faders to their lowest position
Choose the desired page by using the <PAGINA/RECCLEAR> button
Place the Preset B x fader in edit mode
o Press and hold the <EDIT/ALL REV> button
o Press and release the <PRESET B x> button
o Release the <EDIT/ALL REV> button
o The yellow Led above the Preset B fader will lit and the actual scène is shown.
Press the <STEP> till you have reached the scene that should come NEXT to the scene that you
want to insert.
Press and release the <INSERT/0% OR 0-255> button.
To exit the edit mode:
o Press and hold the <RECORD/SHIFT> button
o Press and release the <KILL/REC EXIT> button
o Release the <RECORD/SHIFT> button
o The normal output of the controller is shown again
C. Delete scenes:
!! It is inpossible to recover deleted scenes.
Be sure that the program mode is activated.
Be sure that Chase/Scenes is activated.
Move all the Preset A faders to their lowest position
Choose the desired page by using the <PAGINA/RECCLEAR> button
ENGLISH OPERATION MANUAL
JB SYSTEMS
®
18/93 CMX24
Place the Preset B x fader in edit mode:
o Press and hold the <EDIT/ALL REV> button
o Press and release the <PRESET B x> button
o Release the <EDIT/ALL REV> button
o The yellow Led on top of the de Preset B will Lit and the actual scene is shown.
Select the scene that you want to delete by using the <STEP> button.
Press and release the <DELETE/REV ONE> button
If needed, choose another scene by using the <STEP> button en delete it by using the
<DELETE/REV ONE> button
To exit the edit mode:
o Press and hold the <RECORD/SHIFT> button
o Press and release the <KILL/REC EXIT> button
o Release the <RECORD/SHIFT> button
o The normal output of the controller is shown again
Empty a preset B fader
!! it will not be possible to undo this action !!
Be sure that the program mode is activated.
Press and hold the <RECORD/SHIFT> button
Press and release the <PRESET B x> button of the desired preset B fader
Press and release the <PRESET B x> button of the desired preset B fader
(So the preset B x button has to be pressed 2 times).
Release the <RECORD/SHIFT> button
Copy Preset Bfader
!! Only possible with scenes!!
If you want to copy a scene to another preset B fader to use again the same scène or to use it as a base for
a new scene.
Be sure that the Chase/Scene mode is activated
Bring all the preset A faders (or the master A fader) to their lowest position
Bring all the preset B faders to their lowest position
Bring the Master B fader to its lowest position (100%)
Modify the page if necessary
Move the preset B fader of the scene that you want to copy to 100%
<RECORD/SHIFT> +<PAGINA/REC CLEAR> to delete the working memory
<RECORD/SHIFT> to store the scene
Modify the page if necessary
<RECORD/SHIFT> + <PRESET B x> to store the scene in another preset B fader, the scene is
now copied
Delete a CHASE
To delete a chase or a scene from a preset B fader in Chase/Scenes mode:
Use the <PAGINA/RECCLEAR> button to select the page
Press and hold the <RECORD/SHIFT> button
Press and release the <PRESET B x> button
Press and release the <PRESET B x> button again
Release the <RECORD/SHIFT> button
Blind/Home
In Chase/Scenes mode u can use the <Blind> and the <Home> buttons. These buttons are not used in
Single Preset and Double Preset mode.
Preset A
To disconnect the channels 1 to 12 from the preset B scenes/chases:
o Press and hold the <BLIND> button
o Press and release the <Preset Ax> button
o Release the <BLIND> button
The level will only be determinated by using the preset A fader, master A fader and the flash buttons.
… 11 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JB systems CMX-24 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JB systems CMX-24 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 2,09 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info