Manual JB systems CMX-24 (page 10 of 49) (English, German, Dutch, French)

497793

Zoom out

Zoom in

1/49

ENGLISH OPERATION MANUAL

JB SYSTEMS

15/93 CMX24

 Press and release the <RECORD/SHIFT> button

 [004] appears on the display = fourth scene

The four scenes are now stored in the working memory. Now we will store the working memory in the Preset

B 7 fader of page 1:

 Select page 1 by pressing several times on the <PAGINA/REC CLEAR> till the Led 1 will lit.

 Press and hold the <RECORD/SHIFT> button

 Press and release the <PRESET B 7> button

 Release the <RECORD/SHIFT> button

Now you just have stored a chase in the Preset B 7 fader. The working memory has been cleared.

 Play a Chase

You can recall the stored chase in Chase/Scenes mode. Be sure that:

 Chase/Scenes mode is activated (by using the <MODUS SELECT/REC SPEED> button)

 {MASTER B} fader is at its lowest position

 {SPEED} fader is at its highest position

 {FADER} fader is at its highestposition

 MIX Chase is activated; make this selection with the <PARK> button above the MASTER B

fader, in Chase/Scenes mode. The [MIX CHASE] Led is situated at the top of the FADE fader,

this must be Lit.

 Blackout is not activated

 Audio is not activated: press/release the <AUDIO> button till the [AUDIO] Led goes out.

 All the preset faders (A & B) are set at their lowest position.

Move the {PRESET B 7} fader upwards. The chase will appear on the green Leds (and on your fixtures).

U can also work with the:

 {SPEED} fader, the chase speed will be modified

 {FADE} fader: the scene will fade into the next scene. If the fade time is set too high, it can be

possible that the lamps will not lit at full level, or maybe the chase will not move anymore.

 Manual activation of a Chase

Sometimes it is usefull to activate manually every step in a chase.

This can be done in a very easy way:

 {SPEED} fader at its lowest position: SHOW MODE

 Press and release the <STEP> button, situated at the top of the speed fader.

Each time that you press the STEP button, the next step of the chase will be activated.

 Synchronize a Chase

Very often, when you play music, you want to synchronize the speed of the chase with the beat of the music.

The CMX24 offers you the possibility to press twice on a button, so that the interval time between the two

moments will be used as speed setting for the chase. you can do it like this:

Press twice the <TAP SYNC> button on the beat of the music.

The interval time will be used to set automatically the chase speed. The position of the {SPEED} is not

important.

! As soon as you move the {SPEED} fader, the chase time will be controlled again by this speed fader!

 Memorize the speed

When several chases are running, the {SPEED} fader, the <STEP> button and the <TAP SYNC> button will

influence all the chases. Sometimes it is useful to program a fix speed, so that the chase can not be

influenced by the speed fader, the step and tap sync buttons while running.

This can be done in a very easy way:

 Set the chase time by using the {SPEED} fader or the <TAP SYNC> button.

 Be sure that the {SPEED} fader is not set at its lowest position (SHOW MODUS).

 Press and hold the <MODUS SELECT/REC SPEED>

 Press and release the <PRESET B x> button of the PRESET B fader where the chase is stored

 Release the <MODUS SELECT/REC SPEED> button

The chase speed is now stored in the PRESET B fader, together with the chase.

ENGLISH OPERATION MANUAL

JB SYSTEMS

16/93 CMX24

To delete:

To delete the stored speed:

 Be sure that the {SPEED} fader is at its lowest position: SHOW MODE.

 Press and hold the <MODUS SELECT/REC SPEED> button

 Press and release the <PRESET B x> button of the PRESET B fader where the chase is stored

 Release the <MODUS SELECT/REC SPEED> button

The time (speed) is erased from the PRESET B fader. Now you can modify again the speed of the chase by

using the {SPEED} fader or the <TAP SYNC> button.

 Audio

The CMX24 has a built-inmicrophone

If you dispose of an audio source (CD player, audio mixer, etc) you can synchronise the speed of the chase

with the sound. Connect the audio source with the LINE IN Cinch connector of the CMX24. Press the

<AUDIO> button till the [AUDIO] Led will lit. Move the {AUDIO FADER} fader till the chase is synchronized

with themusic.

To switch off the audio function:

- Press and release the <AUDIO> button till the [AUDIO] Led goes out.

 Chase reverse

You can reverse the working direction of a chase. There are 4 possibilities:

ALL REV

All the chases will be reversed.

 Press and release the <EDIT/REVALL> button, the chase direction will be reversed.

 Repeat this to reverse again the chase direction.

REV ONE

Only one particular chase will be reversed

 Press and hold the <DELETE/REV ONE> button

 Press a <PRESET B x> button that is containig a chase.

 Release the <DELETE/REV ONE> button

CHASE REV

All the chases that have no speed stored in the preset B fader will be reversed.

 Press and release the <UP/CHASEREV> button: the case will be reversed.

 Repeat this to reverse again the chase direction.

BEAT REV

All the chases that have a speed stored in the preset B fader will be reversed.

 Press and release the <DOWN/BEAT REV> button: the chase will be reversed.

 Repeat this to reverse again the chase direction.

 To modify a Chase

There are 3 ways to modify a chase. You can:

A. Modify the output levels

B. Add scenes

C. Delete scenes

A. Modify the output levels:

 Be sure that the program mode is activated.

 Be sure that Chase/Scenes is activated.

 Bring all the preset A faders to their lowest position

 Choose the page by using the <PAGINA/RECCLEAR> button

 Set the Preset B x fader in edit mode

o Press and hold the <EDIT/ALL REV> button

o Press and release the <PRESET B x> button

o Release the <EDIT/ALL REV> button

o The yellow Led on the top of the Preset B fader will Lit while the actual value is shown,

 Select the scene that you would like to modify by pressing the <STEP> button.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of JB systems CMX-24 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 2,09 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

JB systems CMX-24 Manual

Product: