Manual Janome Memory Craft 6500P (page 28 of 78) (English)

472822

Zoom out

Zoom in

1/78

Changing sewing direction:

Stop the machine a few stitches before the end of a seam.

Press the up/down needle button a few times until the

needle falls on the end of the seam.

Raise the presser foot.

Pivot the fabric around the needle to change the sewing

direction as desired.

Lower the presser foot and start sewing in a new

direction.

Using the cloth guide:

Attach the cloth guide on the needle plate with a screw.

Adjust the position of the cloth guide and tighten the

screw.

Place the fabric with its edge against the cloth guide and

sew.

1 Screw

2 Cloth Guide

3 Threaded Hole

Using the seam guide lines:

The seam guides on the needle plate and hook cover help

you to measure seam allowance.

NOTE:

The numbers on the needle plate indicate the distance

from the center needle position in millimeters and inches.

1 Center Needle Position

2 Edge of the Fabric

3 Guide Lines

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Janome Memory Craft 6500P in the language / languages: English as an attachment in your email.

The manual is 1,1 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Janome Memory Craft 6500P Manual

Product: