472822

Janome Memory Craft 6500P Manual

27
Zoom out
Zoom in
Previous page
1/78
Next page
25
4
1
2
3
BASIC STITCHES (Mode 1)
Straight Stitch
Machine Setting
Pattern: 01
Thread tension:2-6
Presser foot: Zigzag foot A
Foot pressure: 3
To sew
Raise the presser foot and position the fabric next to a
seam guide line on the needle plate. Lower the needle to
the point where you wish to start.
Pull the needle and bobbin threads toward the rear.
Lower the presser foot.
Depress the foot control to start sewing. Gently guide the
fabric along the seam guide line letting the fabric feed
naturally.
To sew from the edge of thick fabric
The black button on the zigzag foot locks the foot in the
horizontal position.
This is helpful when starting sewing from extreme edge of
thick fabrics or sewing across a hem.
Lower the needle into the fabric at the point where you wish
to start sewing.
Lower the foot while pushing the black button in. The foot is
locked in the horizontal position to avoid slipping.
1 Thick Fabrics
2 Black Button
Securing seam
For fastening the ends of seams, press the reverse button
and sew several reverse stitches.
The machine sews in reverse as long as you press and
hold the reverse button.
Press the reverse button once when sewing the Lock-a-
Matic stitch (pattern 03) or locking stitch (pattern 04) so the
machine will lock the stitch off and stop automatically.
After finishing sewing, press the thread cutter button to cut
the threads.
3 Thread Cutter Button
NOTE:
Avoid trimming the threads with the needle in up position,
as a needle mark can be distinct.
To start the next seam, it is recommended to bring the
bobbin thread up and pull both needle and bobbin threads
to the back under the presser foot.
NOTE:
Use the thread cutter on the face plate to cut the
specialized or thick threads if the auto thread cutter does
not work well.
4 Thread Cutter
… 27 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Janome Memory Craft 6500P at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Janome Memory Craft 6500P in the language / languages: English as an attachment in your email.

The manual is 1,1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info