602027

Janome Memory Craft 4900QC Manual

66
Zoom out
Zoom in
Previous page
1/89
Next page
64
26
Twin needle sewing
Machine settings
q Pattern: 26 (example)
w Presser foot: Satin stitch foot F
e Thread tension: AUTO
NOTES:
*When you sew patterns with the twin needle, press the
twin needle button and test the stitches first before you
begin to sew.
*Use the zigzag foot A or satin stitch foot F for twin needle
sewing.
*Turn off the machine before changing the needle.
* Use #60 or finer threads for twin needle sewing.
Use the additional spool pin and spool stand.
Turn on the power switch and press the twin needle button
. Select a pattern and sew.
* The stitch width is limited to 3 mm or less.
q Spool
w Additional spool pin
e Felt
r Spool stand
t Hole for additional spool pin
Threading the machine for twin needle sewing
Place two spools of thread on the spool stand.
Draw both threads from the spools and thread them
through the points from z to n.
Make sure that the two strands of thread do not get
tangled.
Slip one of the threads in the needle bar thread guide on
the left, and the other on the right.
Thread the needles from the front to back with your hand.
NOTES:
Threading from z to v is the same as for a single needle.
The automatic needle threader cannot be used for the twin
needle.
qw
e
z
c
x
v
b
n
q
w
e
r
t
NOTE:
If you select a pattern not suitable for twin needle sewing,
the LCD screen will show a warning message.
… 66 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Janome Memory Craft 4900QC at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Janome Memory Craft 4900QC in the language / languages: English as an attachment in your email.

The manual is 3,66 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info