602027

Janome Memory Craft 4900QC Manual

64
Zoom out
Zoom in
Previous page
1/89
Next page
62
1
To sew:
Fold the edge of the fabric twice, 6 cm (2 3/8˝) in length
and 0.3 cm (1/8˝) in width.
Tr im the corner 0.5 cm (3/16˝) by 0.8 cm (1/4˝) for
easier insertion of the hem into the foot.
Position the fabric aligning the edge of hem with the
guide on the foot.
Lower the foot and sew 1–2 cm (1/2˝ – 1˝) while pulling
both threads to the back.
Stop the machine with the needle down in the fabric.
Raise the foot and insert the folded portion of the fabric
into the curl of the foot.
Lower the foot, and then sew by lifting up the edge of
the fabric to keep it feeding smoothly and evenly.
0.5 cm
Cording
Machine settings
q Pattern: 32 (mode 2)
w Presser foot: Cording foot H
e Thread tension: AUTO
Attach the cording foot H
3-strand cording
Insert 3 strands of cording under the spring of the foot
and draw them under the foot to the rear.
Hold the three strands parallel for even sewing and be
sure to sew over the strands
Stitch slowly and smoothly, guiding the fabric as you
sew.
q Spring
32
0.8 cm
Rolled hem
Machine settings
q Pattern: 1 (mode 1)
w Presser foot: Hemmer foot D
e Thread tension: AUTO
qw
e
qw
e
q
1-strand cording
Insert 1 strand of cording under the spring of the foot
and draw it under the foot to the rear (use the center slot
of the spring).
Select pattern 8 (mode 1), then decrease the stitch
width and sew.
… 64 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Janome Memory Craft 4900QC at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Janome Memory Craft 4900QC in the language / languages: English as an attachment in your email.

The manual is 3,66 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info