602027

Janome Memory Craft 4900QC Manual

44
Zoom out
Zoom in
Previous page
1/89
Next page
42
17
Double layer buttonhole
To make a solid and sturdy buttonhole, sew another layer of
buttonhole over the previous stitches.
After the buttonhole is finished, simply start the machine
again.
Do not raise the foot or buttonhole lever.
The machine will sew another buttonhole in the following
order and stop automatically when it is completed:
z Step 1:Straight stitching in reverse to go back to the
starting point
x Step 2:Front bartack and left row
c Step 3:Right row
v Step 4:Back bartack and locking stitches at the end
z
x
c
v
qw
e
q
w
Corded buttonhole
Machine settings
q Pattern: 17 (mode 2)
w Presser foot: Automatic buttonhole foot R
e Thread tension: AUTO
To sew a corded buttonhole, follow the same procedure as
for a square buttonhole.
z With the automatic buttonhole foot R raised, hook the
filler cord on the spur at the back of the buttonhole foot.
x Bring the ends of cord toward you under the buttonhole
foot clearing the front end.
c Hook the ends of the filler cord into the forks on the front
of buttonhole foot to hold them tight.
q Spur
w Forks
v Lower the needle into the garment where the buttonhole
will start and lower the foot.
b Lower the buttonhole lever and buttonhole foot. Start the
machine and sew the buttonhole over the filler cord.
The machine stops automatically when finished.
n Remove the fabric from the machine and cut the sewing
threads.
m Pull the left end of the filler cord to tighten it.
Thread the end of the cord through a darning needle
and draw it to the wrong side of the fabric and cut.
NOTE:
Set the stitch width in accordance with the thickness of the
filler cord used.
To cut the buttonhole opening, refer to page 41.
… 44 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Janome Memory Craft 4900QC at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Janome Memory Craft 4900QC in the language / languages: English as an attachment in your email.

The manual is 3,66 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info