Manual Janome Memory Craft 4900QC (page 42 of 89) (English)

602027

Zoom out

Zoom in

1/89

c Pull the buttonhole lever down as far as it will go.

q Buttonhole lever

NOTE:

If you start sewing without pulling down the buttonhole lever,

the LCD screen will show a warning and the machine will

stop after a few stitches. Pull the buttonhole lever down and

restart the machine.

v Insert the corner of the fabric under the foot. Press

the up/down needle button twice.

Remove the fabric to the left to draw the needle

thread through the hole of the foot.

Place the garment under the foot, and lower the

needle at the starting point of the buttonhole mark.

Then lower the automatic buttonhole foot R.

w Buttonhole mark

e Needle thread

r Bobbin thread

t Starting point

NOTE:

Make sure there is no gap between the slider and front

stopper, otherwise the left and right lengths will be different.

y Slider

u Front stopper

i Sewing gap

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Janome Memory Craft 4900QC in the language / languages: English as an attachment in your email.

The manual is 3,66 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Janome Memory Craft 4900QC Manual

Product: