602027

Janome Memory Craft 4900QC Manual

28
Zoom out
Zoom in
Previous page
1/89
Next page
26
Using the seam guides on the needle plate
q Needle drop position
w Edge of fabric
e Needle plate guide lines
The seam guides on the needle plate are engraved to help
you measure seam width. The number on the needle plate
indicates the distance between the center needle position
and the edge of the fabric. The lines are 1/8˝ (0.3 cm)
apart, and engraved at 3/8˝, 4/8˝, 5/8˝ and 6/8˝. The lines in
millimeters are 5 mm apart, and are engraved at 10 mm,
15 mm and 20 mm.
Turning a square corner
q Cornering guide
w Up/down needle position button
e Presser foot lifter
To maintain a 5/8˝ seam allowance after turning a square
corner, use the cornering guide on the needle plate.
1. Stop sewing when the front edge of fabric reaches the
cornering guide lines q.
2. Lower the needle by pressing the up/down needle
position button w.
3. Raise the presser foot e and turn the fabric
counterclockwise 90°.
4. Lower the presser foot, and begin stitching in the new
direction.
Using the quilting guide
q Quilting bar holding screw
w Quilting bar
e Seam guide line
Use the seam guide lines on the needle plate, and the
free-arm, to help determine the distance between quilting
stitches. The quilting bar will help keep the seam lines
parallel and evenly spaced.
z Loosen the quilting bar holding screw q on the back of
the presser foot as shown.
x Slide the quilting w into the hole under the screw to
the space of quilting stitches you desire.
c Tighten the screw q.
v Sew guiding the quilting over the previous row of
stitching.
See page 57 for quilting stitch instructions.
q
w
e
q
w
e
w
q
e
Sewing on heavy fabric
q Fabric
w Black button
The black button on foot A will lock the foot in a horizontal
position if you push it in before lowering the presser foot.
This ensures even feeding at the beginning of seams and
helps when sewing many layers of fabric such as sewing
over welt seams when hemming jeans.
When you reach a point of increased thickness, lower the
needle and raise the presser foot. Press the toe of the foot
and push in the black button, then lower the foot and
continue sewing. The button will be released after a few
stitches.
q
w
… 28 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Janome Memory Craft 4900QC at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Janome Memory Craft 4900QC in the language / languages: English as an attachment in your email.

The manual is 3,66 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info