602027

Janome Memory Craft 4900QC Manual

27
Zoom out
Zoom in
Previous page
1/89
Next page
25
1
2
BASIC STITCHES (MODE 1)
Straight stitch
Machine settings
q Pattern: 1 or 2 (mode 1)
w Presser foot: Zigzag foot A
e Thread tension: AUTO
To sew
Raise the presser foot and position the fabric next to a seam
guide line on the needle plate. Lower the needle to the point
where you wish to start.
Pull the needle and bobbin threads toward the rear.
Lower the presser foot.
Depress the foot control to start sewing. Gently guide the
fabric along the seam guide line letting the fabric feed
naturally.
qw e
Changing sewing direction
Stop the machine and bring the needle down into the fabric
by pressing the up/down needle position button.
Raise the presser foot.
Pivot the fabric around the needle to change sewing
direction as desired. Lower the presser foot.
q Up/down needle position button
w Presser foot lifter
Securing a seam
For fastening the end of seam, press the reverse button
and sew several reverse stitches.
The machine sews in reverse as long as you press and
hold the reverse button.
Press the reverse button once when sewing the Lock-a-
Matic stitch (pattern 3) or locking stitch (pattern 4) so
the machine will lock the stitch off and stop
automatically.
Cut the thread by using the thread cutter.
The threads are cut the proper length for starting the next
seam.
e Thread cutter
3
4
q
w
e
… 27 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Janome Memory Craft 4900QC at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Janome Memory Craft 4900QC in the language / languages: English as an attachment in your email.

The manual is 3,66 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info