Manual Janome Memory Craft 4800 (page 24 of 68) (English)

602026

Zoom out

Zoom in

1/68

Straight Stitch Sewing

1 Stitch pattern: 01

2 Presser foot: Foot A or foot H

• Starting to sew

Raise the presser foot and position the fabric next to a

seam guide line on the needle plate (see page 24).

Lower the needle to the point where you want to start.

Lower the presser foot and pull the threads toward the

back. Depress the foot control. Gently guide the fabric

along a seam guide line letting the fabric feed naturally.

• Changing sewing direction

Stop the machine and bring the needle down into the

fabric by pressing the Up/down needle position button.

Raise the presser foot.

Pivot the fabric around the needle to change sewing

direction as desired. Lower the presser foot.

1 Up/down needle position button

2 Presser foot lifter

• Finishing sewing

To fasten the ends of seams, press the reverse button

and sew several reverse stitches.

Raise the presser foot. Remove the fabric, draw the

threads to the back and cut using the thread cutter.

The threads are cut at the proper length for starting the

next seam.

- When pattern is selected, reverse stitches are

sewn automatically at the beginning of the seam,

then sewing continue forward.

- When you reach the end edge of the fabric, press

the reverse button once.

The machine will sew four reverse stitches, four

forward stitches then stop sewing.

1 Reverse button

2 Thread cutter

3 Fabric

SECTION III BASIC SEWING

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Janome Memory Craft 4800 in the language / languages: English as an attachment in your email.

The manual is 2,13 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Janome Memory Craft 4800 Manual

Product: