Manual Janome Memory Craft 11000 Special Edition (page 32 of 112) (English)

602019

Zoom out

Zoom in

1/112

Variety of overcasting stitches

U9 Multiple zigzag stitch (tricot stitch): Zigzag foot A

This stitch is used to finish a raw edge of synthetics and

other stretch fabrics that tend to pucker.

Sew along the fabric edge leaving an adequate seam

allowance. After sewing, trim off the seam allowance

closer to the stitches.

U10 Overcasting stitch: Overedge foot C

This stitch can be used to simultaneously seam and

overcast edges of fabrics.

Use this stitch when you do not need to open seams

flat.

Place the fabric edge next to the guide of the foot and

then sew.

U11 Knit stitch: Zigzag foot A

This stitch is recommended for sewing such fabrics as

synthetic knits and stretch velour as it provides the

greatest amount of elasticity and strength.

Sew along the fabric edge leaving an adequate seam

allowance.

After sewing, trim the seam allowance close to the

stitches.

U12 Double overedge stitch: Overedge foot C

This stitch is excellent for fabrics that tend to fray

extensively such as linens and gabardines.

Two rows of zigzag stitches are simultaneously sewn

over the edge to insure that the fabric will not ravel.

U13 Overlock stitch: Overcasting foot M

This stitch finishes the edges of fabric similar to a

commercial overlocking machine for a professional

look. The stitch width cannot be adjusted.

CAUTION:

When you use overedge foot C or overcasting foot M,

you must set the zigzag width at 5.0 or wider to prevent

the needle from hitting the foot wires.

U10

U11

U12

U13

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Janome Memory Craft 11000 Special Edition in the language / languages: English as an attachment in your email.

The manual is 18,61 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Janome Memory Craft 11000 Special Edition Manual

Product: