602019

Janome Memory Craft 11000 Special Edition Manual

31
Zoom out
Zoom in
Previous page
1/112
Next page
32
3.5
2.20
4.2
OK
Default
Adjust
15
OK
Default
mm
40302010
mm
Cloth Guide
CAUTION:
Always provide sufficient space to the left of the
machine when using the cloth guide.
Do not use the cloth guide when the buttonhole foot R
is attached.
If you wish to use the optional clothsetter table with the
cloth guide, attach the extension table to prevent the
carriage from hitting the table.
Attaching the cloth guide
Insert the pins on the cloth guide into the carriage
holes. Turn the attaching knob clockwise to secure the
cloth guide.
Remove the fillet if necessary.
1 Pins
2 Cloth Guide
3 Carriage Holes
4 Attaching knob
Setting the cloth guide position
Press the adjust key to open the manual setting
window.
Press the cloth guide key.
The visual touch screen will show a warning message.
Press the OK key.
The cloth guide adjustment window will open.
Press the “+” or “–” key to move the cloth guide to the
desired position.
The cloth guide position is indicated on the scale bar
and the distance from the center needle drop position
is indicated by millimeter or inch.
Press the OK key to register the setting and close the
cloth guide adjustment window.
NOTE:
The machine will not run if the cloth guide adjustment
window is open.
Press the default key to return the cloth guide to the
default position (15 mm or 5/8”).
Make sure to return the carriage to the stored position
by pressing the cloth guide storage key and
remove the cloth guide after sewing is finished.
Overcasting with the Cloth Guide
Select pattern U10 and use the overedge foot C.
Set the cloth guide position at 2 mm (1/16˝) and sew.
4
Utility(U)
6
2
3
5
7
8
9
10
11
12
13
14
15
16
A
17
1
Straight Stitch
1918
B
2
OK
Default
mm
40302010
mm
1
4
3
2
… 31 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Janome Memory Craft 11000 Special Edition at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Janome Memory Craft 11000 Special Edition in the language / languages: English as an attachment in your email.

The manual is 18,61 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info