Manual Janome Memory Craft 11000 Special Edition (page 27 of 112) (English)

602019

Zoom out

Zoom in

1/112

Securing seams

For fastening the ends of seams, press the reverse

button and sew several reverse stitches.

The machine sews in reverse as long as you press and

hold the reverse button.

Press the reverse button once when sewing the

lock-a-matic stitch (pattern U3) or locking stitch (pattern

U4) and the machine will lock the stitches off and stop

automatically.

Cutting threads

After finishing sewing, press the thread cutter button

to cut the threads.

NOTES:

The thread cutter button does not function when the

presser foot is raised.

To start the next seam, it is recommended to bring the

bobbin thread up and pull both needle and bobbin

threads to the back under the presser foot.

Use the thread cutter on the face plate to cut

specialized or thick threads if the auto thread cutter

does not work well.

To use the thread cutter on the face plate, remove the

fabric and draw it to the back.

Pull the treads up and slip them between the thread

cutter and face plate from behind.

Pull the threads toward you to cut.

Using the seam guide lines

The seam guides on the needle plate and hook cover

help you measure seam allowance.

NOTE:

The numbers on the needle plate indicate the distance

from the center needle position in millimeters and

inches.

Angle scale on the needle plate

You can easily seam patchwork pieces at the desired

angle without marking by using the unique angle scales

on the needle plate.

The angle scales are marked at 45, 60, 90 and 120

degrees.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Janome Memory Craft 11000 Special Edition in the language / languages: English as an attachment in your email.

The manual is 18,61 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Janome Memory Craft 11000 Special Edition Manual

Product: