602019

Janome Memory Craft 11000 Special Edition Manual

26
Zoom out
Zoom in
Previous page
1/112
Next page
27
Utility Stitches
Straight stitches
Patterns U1 to U6 are straight stitches for seaming.
Press the pattern selection key of the desired stitch.
Starting to sew
Raise the presser foot and position the fabric next to a
seam guideline on the needle plate. Lower the needle
to the point where you want to start.
Pull the needle and bobbin threads towards the rear.
Press the start/stop button or foot control. Gently guide
the fabric along the seam guideline letting the fabric
feed naturally.
Sewing from the edge of thick fabric
The black button on the zigzag foot locks the foot in the
horizontal position.
This is helpful when you start sewing at the extreme
edge of thick fabrics or sewing across a hem.
Lower the needle into the fabric at the point where you
wish to start sewing.
Lower the foot while pushing in the black button. The
foot will be locked in the horizontal position to avoid
slipping.
Changing sewing direction:
Stop the machine and bring the needle down into the
fabrics by pressing the needle up/down button.
Raise the presser foot.
Pivot the fabric around the needle to change the sewing
direction as desired.
Lower the presser foot and start sewing in a new
direction.
4
Utility(U)
6
2
3
5
7
8
9
10
11
12
13
14
15
16
A
17
1
Straight Stitch
1918
B
… 26 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Janome Memory Craft 11000 Special Edition at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Janome Memory Craft 11000 Special Edition in the language / languages: English as an attachment in your email.

The manual is 18,61 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info