602018
17
Zoom out
Zoom in
Previous page
1/181
Next page
16
5
5 Press the Auto Threader Button again.
The threader goes up automatically and
pulls the thread out through the needle
eye. Pull the loop of thread to the back.
3
2
1
NOTES:
The Automatic Needle Threader works
well on the needles Nos.11-14, sewing
threads Nos.60-120 and Janome
embroidery threads.
Thick threads, Nos. 20 and 30, cannot be
used.
CAUTION:
To use the Automatic Needle Threader
properly, always make sure to pay
attention the following instructions.
Do not turn the handwheel while the
Automatic Needle Threader is in the
lowered position to prevent it from
damage.
Do not touch the Automatic Needle
Threader while it is moving.
If the Automatic Needle Threader is
locked by accidentally turning the
handwheel, release it as follows:
1. Carefully turn the Handwheel to move
the needle up or down a little, so that it
frees the Automatic Needle Threader.
2. Press the Auto Needle Threader Button
to restore the Automatic Needle Threader
to the up position.
1 Handwheel
2 Auto Needle Threader Button
If the Automatic Needle Threader will not
return to the up position by pressing the
Auto Needle Threader Button, correct it
as follows:
1. Turn the Power Switch off.
2. Open the Face Plate. Beware of the hot
bulb.
3. Turn the Threader Shaft counterclockwise
to release the hook from the needle eye.
4. Turn the Power Switch on and the
Automatic Needle Threader will return to
the up position.
5. Close the Face Plate.
1 Power Switch
2 Face Plate
3 Threader Shaft
1
2
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Janome Memory Craft 10001 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Janome Memory Craft 10001 in the language / languages: English as an attachment in your email.

The manual is 4,93 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info