Manual Janome Memory Craft 10001 (page 15 of 181) (English)

602018

Zoom out

Zoom in

1/181

Threading the Machine

Raise the Presser Foot Lifter. Press the

Up/Down Needle Button to raise the needle

to its highest position.

Hold the upper thread with both hands as

shown and place it downward into the

Slit.

Draw the thread around the Thread Guide

following the solid yellow line as shown in

the diagram.

1Slit

2 Thread Guide

Then draw the thread down around the

Check Spring Holder.

Firmly draw the thread up to the Take-up

Lever and down into its eye from the right to

the left.

3 Check Spring Holder

4Take-up Lever

Then draw it down through the Lower

Thread Guide.

Slide the thread behind the Needle Bar

Thread Guide on the left.

5 Lower Thread Guide

6 Needle Bar Thread Guide

Thread the needle from front to back by

hand or use the Automatic Needle Threader.

NOTES:

• Memory Craft 10001 is equipped with

a thread breakage sensor.

If the machine is run without thread, it

automatically stops after about 10

strokes.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Janome Memory Craft 10001 in the language / languages: English as an attachment in your email.

The manual is 4,93 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Janome Memory Craft 10001 Manual

Product: