472817
9
Zoom out
Zoom in
Previous page
1/93
Next page
7
When stitches D1, D2, 8, 9 Mode 1, D01, D02, 08, 09 Mode 2 and 01, 02 Mode 3
are selected, the machine will immediately sew locking stitches when the Auto-
lock button is pressed, then automatically stop. When sewing any other stitches,
the machine will sew locking stitches at the end of the current pattern and
automatically stop.
3
1
2
4
5
Press this button to start or stop the machine. The machine starts running slowly
for the first few stitches, it then runs at the speed set by the speed control slider.
The button turned on to red while the machine running.
The button turned on to green while the machine stopping.
NOTES:
Start/stop button cannot be used when the foot control is connected to the
machine.
If you start the machine with the presser foot up (normal up position or extra
lifted position), the LCD screen will advise you to lower tht the machine.
(See page 11. for the presser lifter position)
2 Reverse stitch button
When stitches D1, D2, 8, 9 Mode 1, D01, D02, 08, 09 Mode 2 and 01, 02 Mode 3
are selected, the machine will sew in reverse while the reverse stitch button is
pressed.
If you press the reverse stitch button when sewing any other stitches, the machine
will immediately sew locking stitches and automatically stop.
3 Auto-lock button
4 Up/down needle position button
Press this button to bring the needle up or down. The machine will stop with the
needle up or down depending on the needle position determined by this button.
The needle position LED will turn on when the down position is selected.
5 Needle up/down stop position LED
NOTE:
The needle will always stop in the up position after sewing buttonholes,
bartacks, eyelets and darning.
If you press the up/down needle position button when the presser foot is at the
extra lifted position, the LCD screen will advise you to lower the foot.
1 Start/stop button
Function Buttons
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Janome MC6600P at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Janome MC6600P in the language / languages: English as an attachment in your email.

The manual is 1,34 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info