472817
92
Zoom out
Zoom in
Previous page
1/93
Next page
90
The machine is started when it halts due to
the overload.
The feed dog is dropped while sewing.
The bobbin winder spindle is locked while
winding a bobbin.
Audible Signal
The Buzzer Sounds when:
pip
pip-pip-pip
Normal operation
Invalid operation or malfunction
Warning Sign
Cause
The machine is out of order due to a
problem in the control circuit.
The power is turned on again after auto
thread cutting has been interrupted.
The presser foot is raised before auto
thread cutting is completed.
The elongation button is pressed when a
pattern that cannot be elongated has
been selected.
The LCD screen shows an
abnomal display.
Turn the power off and turn it on again.
The twin needle button is pressed when a
pattern unsuitable for twin needle sewing
has been selected.
The memory button is pressed when a
pattern that cannot be memorized
has been selected.
The machine is started without lowering the
feed dog when you select the basting or
free motion quilting.
Try this
Elongation is applicable only to
satin stitches.
Select a memorable pattern.
Lower the feed dog
Sew with a single needle.
Press the Thread cutter button to
finish auto thread cutting.
Wait for at least 15 seconds to
restart. Remove tangled threads
around hook race and auto thread
cutting device.
Do not drop or raise the feed dog
while the machine is running.
Turn off the power and remove
tangled threads.
Contact the service center or the
store from whom the machine
was purchased.
92


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Janome MC6600P at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Janome MC6600P in the language / languages: English as an attachment in your email.

The manual is 1,34 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info