472816
35
Zoom out
Zoom in
Previous page
1/41
Next page
33
Patchwork
Machine setting
q Stitch pattern: #09
w Presser foot: Satin stitch foot F
e Thread tension: 1 – 4
Applique
Machine setting
q Stitch pattern: #16, #17, #18
w Presser foot: Satin stitch foot F
e Thread tension: 1 – 4
Place the applique on the fabric and baste it in
place. Sew, guiding the edge of the applique along
the slit on the foot, so that the needle falls off the
edge of the applique when it swings to the right.
NOTE:
When changing the sewing direction at a corner or
curve, lower the needle into the applique at the left
swing and turn the fabric to a new direction.
16
09
Seam the patchwork pieces with straight stitch and
press seam allowance open. Sew pattern #09 on the
right side of garment centering over the seam line.
q
w
e
q
w
e
DECORATIVE SEWING
6
17 18
16
35


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Janome JP720 Platinum at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Janome JP720 Platinum in the language / languages: English as an attachment in your email.

The manual is 0,67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info