472816
33
Zoom out
Zoom in
Previous page
1/41
Next page
31
x
c
v
b
n
!0
i
o
x Place zipper teeth next to margin edge and baste
the zipper tape to the lower fabric layer.
Align zipper foot with margin edge. Return thread
tension and stitch length to original settings.
Sew a seam the entire length of zipper tape.
NOTE:
To secure the beginning of a seam, sew several
reverse stitches.
c Stop the machine 2” (5 cm) before reaching the
slider, with needle in the fabric and raise the foot,
then unzip a few inches to clear a path for
stitching.
i Slider
o 2” (5 cm)
NOTE:
To secure the biginning of a seam, sew several
reverse stitches.
v Remove fabric and close zipper. Take the upper
fabric layer and lay it flat over the zipper.
Baste the zipper tape to the upper fabric layer.
!0 Basting
!1 Zipper tape
!2
!3
!1
!4
b Raise and release the foot, and re-attach it with
the left side pin.
Starting just below zipper bottom stop, sew
across the fabric to about 3/8" (1 cm) distance
from the basting line.
Turn fabric 90 degrees and sew a seam the
entire length of the zipper tape. Before reaching
the slider, stop the machine with needle in
fabric and raise the foot. Use seam ripper to
open a few inches of basting stitch.
!2 Unstitch basting
!3 3/8" (1 cm)
!4 Basting line
n Unzip a few inches to clear a pathfor stitching.
At end of seam, sew a few stitches in reverse to
lock. Once both sides of zipper are sewn, use
the seam ripper to open the rest of basting
stitch.
!5 Basting
!5
33


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Janome JP720 Platinum at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Janome JP720 Platinum in the language / languages: English as an attachment in your email.

The manual is 0,67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info