472842
48
Zoom out
Zoom in
Previous page
1/61
Next page
42
q
w
e
r
q
w
Blind Hem Stitch
Machine setting
q Stitch selector:
w Needle thread tension: 2 – 6
e Presser foot: Zigzag foot: A
Position the fabric, so that the needle at its leftmost
position just pierces the edge of the fold.
After hemming is completed, press together both sides of
the finished hem. The top side of the fabric should show
only the blind stitches.
Use the same color thread as the fabric.
On heavy weight fabrics that ravel, the raw edge should
be overcast first.
Fold the hem, as illustrated.
q Wrong side (Bottom side) of fabric
w 1/4˝-7/16˝ (0.4-0.7 cm)
e Heavy weight fabric
r Light weight fabric
weq
Button Sewing
Machine setting
q Stitch selector:
w Needle thread tension: 3 – 7
e Presser foot: Zigzag foot: A
r Feed dog: Dropped
1. Drop the feed dogs. Place the button below the
zigzag foot, making sure to align the holes with the
horizontal slot in the foot. Lower the presser foot to
hold the button in place.
2. Determine which stitch width setting matches the
distance between the button holes. The needle must
go safely through each hole when sewing.
Unthread the needle to help you determine the
zigzag width.
3. Thread the needle. Turn the handwheel, so that the
needle is in its leftmost position, and then drop the
needle through the left buttonhole.
4. Press the foot control and sew about 10 stitches.
5. Sew the other row of holes (if applicable) using the
steps above. Trim excess threads from both sides of
the fabric.
we
r
q
48


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Janome Jem Gold Plus at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Janome Jem Gold Plus in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 2,09 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info