Manual Janome Jem Gold Plus (page 50 of 61) (English, French, Spanish)

472842

Zoom out

Zoom in

1/61

x Sew forward until you reach the front marking of your

buttonhole. Stop sewing at a left stitch.

c Raise the needle to its highest position.

Set the pattern selector dial at “ ”. Sew 5 stitches,

then stop sewing at a right stitch.

v Raise the needle to its highest position.

Set the pattern selector dial at “ ”. Sew until the

needle reaches the back marking of the buttonhole.

b Raise the needle to its highest position.

Set the pattern selector dial at “ ”. Sew 5 stitches,

then stop sewing.

n Raise the needle and presser foot. Remove the fabric

from the machine and cut the sewing thread. Insert a

pin inside the bartack.

Then cut the opening with a seam ripper.

Take care not to cut the stitches.

t Pin

y Seam ripper

• To sew

z Set the pattern selector dial at “ ”.

Carefully mark buttonhole length on fabric.

Place the fabric under the foot with the buttonhole

marking running toward you.

Draw both the needle and bobbin thread to the left.

Move the slider toward you so that the top mark w on

the slider meets the start mark q.

q Start mark

w Top mark

e Needle thread

r Bobbin thread

4-Step Buttonhole

Machine setting

q Stitch selector:

w Thread tension: 1 – 5

e Presser foot: Sliding buttonhole foot

weq

xc v b

NOTE:

The scale on the slider is engraved in centimeters.

*For easier buttonhole foot attachment, move the slider

all the way to the front of the foot. For easier removal,

move the slider all the way to the back of the foot.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Janome Jem Gold Plus in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 2,09 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Janome Jem Gold Plus Manual

Product: